AMX NXD-430-WH Specifications download pdf (Page 97)

Programming

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

"^" Button Commands (Cont.)

^BDO Set the button draw order (determines what order each layer of the button is drawn).

Syntax:

"'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1-5><1-5><1-5>'"

Variables:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

layer assignments = Fill Layer = 1

Image Layer = 2

Icon Layer = 3

Text Layer = 4

Border Layer = 5

Note: The layer assignments are from bottom to top. The default draw order is 12345.

Example 1:

SEND_COMMAND Panel,"'^BDO-530,1&2,51432'"

Sets the button’s variable text 530 ON/OFF state draw order (from bottom to top) to 

Border, Fill, Text, Icon, and Image.

Example 2:

SEND_COMMAND Panel,"'^BDO-1,0,12345'"

Sets all states of a button back to its default drawing order.

^BFB Set the feedback type of the button.

Note: This command only works on General-type buttons.

Syntax:

"'^BFB-<vt addr range>,<feedback type>'"

Variables:

variable text address range = 1 - 4000.

feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink).

Example:

SEND_COMMAND Panel,"'^BFB-500,Momentary'"

Sets the Feedback type of the button to 'Momentary'.

^BIM Set the input mask for the specified address.

Syntax:

"'^BIM-<vt addr range>,<input mask>'"

Variables:

variable text address range = 1 - 4000.

input mask = Refer to theText Area Input Masking section on page 124 for character

types.

Example:

SEND_COMMAND Panel,"'^BIM-500,AAAAAAAAAA'"

Sets the input mask to ten ’A’ characters, that are required, to either a letter or digit

(entry is required).

1 ... 96 97 98 ... 146

Comments to this Manuals

No comments

AMX NXD-430-WH Specifications Page 97

Comments to this Manuals

Related products and manuals for Touch screen monitors AMX NXD-430-WH