AMX NXD-430-WH Specifications download pdf (Page 38)

Configuring Communication

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

1. After the USB driver has been installed, confirm the proper installation of the large Type-A USB

connector to the PC's USB port, and restart the PC.

2. Connect the terminal end of an Ethernet cable to the Ethernet 10/100 port on the panel.

3. Apply power to the panel.

4. After the panel powers up, press and hold the Front Setup Access button for 6 seconds to access the

Status page.

5. Select Protected Setup > System Settings to open the System Settings page (FIG. 21) and select the

Master tab.

6. Only after the device displays the first panel page should you then insert the mini-USB connector into

the Program Port on the panel. It may take a minute for the panel to detect the new connection and send a

signal to the PC, as indicated by a green System Connection icon. If this is the first time for installing the

USB driver, a USB driver installation popup window appears on the PC.

This window states that the panel has been detected by the PC as a USB-compliant device and the

PC is installing an appropriate USB driver to establish a proper communication to the panel.

This driver was installed on the PC during the installation of the latest NetLinx Studio and

TPDesign4 software application installations. These applications should be installed prior to

setting up a USB connection to the panel.

Windows

notes that the driver does not contain a Microsoft

digital signature.

7. Click Ye s when told that a digital signature was not found. This action accepts the installation of the new

AMX USB driver. The panel is now configured to communicate directly with the PC.

This process completes the association between driver and device. Each time the same touch panel

is connected to the computer, the driver is automatically loaded (using a unique name - example

USB LAN LINK #1, #2). Each time a different touch panel is connected to the computer, the

previous procedures will need to be repeated.

8. Navigate back to the System Settings page.

FIG. 21 System Settings page - using a USB Connection type

Toggle to USB

No connection is established until the Virtual Master becomes active within NetLinx

Studio

1 ... 37 38 39 ... 146

No comments

AMX NXD-430-WH Specifications Page 38