AMX NXD-430-WH Specifications

Operation/Reference GuideTouch PanelsNXD-430/435/435P4.3" Modero® Wall/Flush Mount Touch PanelsLast Revised: 7/2/2012

vi NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTable of Contents^CAL...

Programming88 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BMF (Cont.) ’%GU<bargraph ramp up>’ = Set

Programming89 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BMI Mask image is used to crop a borderless but

Programming90 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BMP Assign a picture to those buttons with a de

Programming91 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BOP Set the button opacity.• The button opacity

Programming92 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BRD Set the border of a button state/states, on

Programming93 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BVL Log-On/Log-Off the computer control connect

Programming94 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^CPF Clear all page flips from a button.Syntax:

Programming95 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^GDI Change the bargraph drag increment.Syntax:

Programming96 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^GRD Change the bargraph ramp-down time in 1/10t

Programming97 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^GSN Change the bargraph slider name or joystick

Table of ContentsviiNXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsInput mask output examples ...

Programming98 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^JSB Set bitmap/picture alignment using a numeri

Programming99 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^JST Set text alignment using a numeric keypad l

Programming100 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^TEC Set the text effect color for the specifie

Programming101 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsText Effect NamesThe following is a listing of text effects names. This list is asso

Programming102 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query CommandsButton Query commands reply with a custom event. Each button/

Programming103 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands?BCB Get the current border color.Syntax:"'?BCB-<v

Programming104 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands (Cont.)?BCT Get the current text color.Syntax:"'?BCT

Programming105 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands (Cont.)?BOP Get the overall button opacity.Syntax:"'

Programming106 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands (Cont.)?BWW Get the current word wrap flag status.Syntax:"

Programming107 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands (Cont.)?ICO Get the current icon index.Syntax:"'?ICO

viii NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTable of Contents

Programming108 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands (Cont.)?JSI Get the current icon justification.Syntax:"&a

Programming109 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands (Cont.)?TEC Get the current text effect color.Syntax:"&ap

Programming110 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsButton Query Commands (Cont.)?TXT Get the current text information.Syntax:"&apo

Programming111 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Runtime OperationsSerial Commands are used in the AxcessX Terminal Emulator mo

Programming112 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Runtime Operation Commands (Cont.)@AKP Pop up the keypad icon and initialize t

Programming113 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Runtime Operation Commands (Cont.)@EKP Extend the Keypad.• Pops up the keypad

Programming114 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Runtime Operation Commands (Cont.)@TKP Present a telephone keypad. • Pops up t

Programming115 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsInput CommandsThese Send Commands are case insensitive. Input Commands^CAL Put pane

Programming116 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsEmbedded CodesThe following is a list of G4-compatible embedded codes: Embedded Code

Programming117 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Setup CommandsThese commands are case insensitive. Panel Setup Commands^MUT S

Introduction1NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsIntroductionNXD-430 Modero Wall/Flush Mount Touch PanelWith a screen size measuring ju

Programming118 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsDynamic Image CommandsThe following table describes Dynamic Image Commands. Dynamic

Programming119 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels^RAF, ^RMF - Embedded CodesThe ^RAF and ^RMF commands add and modify any and all res

Programming120 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsEscape SequencesThe ^RAF and ^RMF commands support the replacement of any special es

Troubleshooting121 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTroubleshootingThis section describes the solutions to possible hardware/firmwar

Troubleshooting122 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTroubleshooting Information (Cont.)My Modero panel can’t obtain a DHCP AddressIn

Troubleshooting123 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTroubleshooting Information (Cont.)The left border of the graphics has a crawlin

Troubleshooting124 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

Appendix A - Text Formatting125 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsAppendix A - Text FormattingText Formatting Codes for Bargraphs/Joy

Appendix A - Text Formatting126 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsText Area Input MaskingText Area Input Masking can be used to limit

Appendix A - Text Formatting127 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsInput Mask RangesThese ranges allow a user to specify the minimum a

Introduction2NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsThis panel includes a mini-USB port for programming and one main NetLinx-programmable

Appendix A - Text Formatting128 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsWhen data overflows from a numerical field, the overflow value is a

Appendix A - Text Formatting129 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSpecial Escape SequencesThe system has only a limited knowledge of

Appendix A - Text Formatting130 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

Appendix B - Complex Script Support131 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsAppendix B - Complex Script SupportOverviewIn many cases, a

Appendix B - Complex Script Support132 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSome languages, notably Hindi and Tamil, are not supported b

Appendix B - Complex Script Support133NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

7/12 ©2012 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without no

Introduction3NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsNXD-430 Specifications (FG2262-01/02) (Cont.)Mini-USB connector: • 5-pin Mini-USB conn

Introduction4NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsNXD-435 Modero Wall/Flush Mount Touch PanelWith a screen size measuring just 4.3 inche

Introduction5NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsThis panel includes a mini-USB port for programming, one main NetLinx-programmable but

Introduction6NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsNXD-435 (FG2262-03/04) Specifications (Cont.)Mini-USB connector: 5-pin Mini-USB connec

Introduction7NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsNXD-435P 4.3" Portrait Wall/Flush Mount Touch PanelThe NXD-435P portrait configur

AMX Limited Warranty and DisclaimerThis Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Part

Introduction8NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSide ConnectorsEthernet and Mini-USB PortsThe NXD-430 and NXD-435 have no power input

Installation9NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsInstallationOverviewWhile the NXD-430 and NXD-435 are designed to fit into pre-existin

Installation10 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels4. To install a new faceplate, rejoin the capacitive touch connector to the male 10-

Installation11NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels3. Remove the appropriate wiring knockouts from the rough-in box (FIG. 7) to accommod

Installation12 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsInstalling the NXD-430 panel within a Rough-In BoxThe Rough-In Box must be mounted p

Installation13NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels7. Extend the locking tabs on the sides of the back box by tightening the screws insi

Installation14 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels1. Prepare the area by removing any screws or nails from the drywall before beginnin

Installation15NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels.10. Reconnect the capacitive touch connector to the 10-pin male plug on the faceplat

Installation16 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels4. Disconnect the capacitive touch connector (B in FIG. 12) from the 10-pin male plu

Installation17NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsInstalling an NXD-430 or NXD-435 into a Rack Mount Kit (NXA-RK5)The NXA-RK5 is a 19&q

AMX Software License and Warranty Agreement• LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner descr

Installation18 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsWiring Guidelines for the NXD-430 and NXD-435 PanelsBoth the NXD-430 and NXD-435 pan

NXD-430/435 Touch Panel Accessories19 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsNXD-430/435 Touch Panel AccessoriesOverviewThe following sect

NXD-430/435 Touch Panel Accessories20 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsFor more information, refer to the PS-POE-AF PoE Injector Ins

Panel Calibration21 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel CalibrationOverviewThis section outlines the steps for calibrating an NXD

Panel Calibration22 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels3. After the "Calibration Successful." message appears, press anywher

Configuring Communication23 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsConfiguring CommunicationOverviewCommunication between a NXD-430 or NXD

Configuring Communication24 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels4. Press the red Device Number field to open the Device Number keypad (

Configuring Communication25 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels8. Press the System Settings button (see FIG. 19) to open the System Se

Configuring Communication26 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels1. After the USB driver has been installed, confirm the proper installa

Configuring Communication27 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsStep 3: Confirm and View the Current AMX USB Device ConnectionsThe USB

Configuring Communication28 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels3. Confirm that a new USB detection icon (FIG. 24) appears in the lower

Configuring Communication29 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsStep 4: Use USB to Configure a Virtual Master (using NetLinx Studio)Bef

Configuring Communication30 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels6. In this dialog, enter the Master System Number (default = 1).7. Clic

Configuring Communication31 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsConfiguring a Wired Ethernet ConnectionIt is necessary to tell the pane

Configuring Communication32 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels2. Open the IP tab (FIG. 30).3. Toggle the DHCP/Static field until the

Configuring Communication33 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsIP Settings section - Configuring a Static IP Address over Ethernet1. T

Configuring Communication34 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsStep 3: Configure an Ethernet Connection TypeBefore commencing, verify

Configuring Communication35 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels2. Click the Communications Settings button to open the Communications

Configuring Communication36 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsOn your PC, click Start > Run to open the Run dialog.Enter cmd i

Configuring Communication37 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsMaster Connection Tab - NetLinx Master Ethernet IP Address - URL ModeIn

Table of ContentsiNXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTable of ContentsIntroduction ...

Configuring Communication38 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsMaster Connection Tab - NetLinx Master Ethernet IP Address - Auto ModeI

Configuring Communication39 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels4. Click OK to enter the information and proceed to the Master’s Manage

Configuring Communication40 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels7. Click Ye s from the Security Alert popup window to agree to the inst

Upgrading Modero Firmware41 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsUpgrading Modero FirmwareOverviewThe process of updating firmware invol

Upgrading Modero Firmware42 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels3. Press the Back button to return to the Protected Setup page.4. Press

Upgrading Modero Firmware43 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels5. Only after the unit displays the first panel page should the mini-US

Upgrading Modero Firmware44 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels6. Click the Edit Settings button on the Communications Settings dialog

Upgrading Modero Firmware45 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels4. If the panel firmware being used is not current, download the latest

Upgrading Modero Firmware46 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels9. Click the Reboot Device checkbox. This causes the touch panel to reb

Setup Pages and Descriptions47 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSetup Pages and DescriptionsOverviewThis section describes the Setup

ii NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTable of ContentsStep 2: Confirm the Installation of the USB Driver on the PC ...

Setup Pages and Descriptions48 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsConnection Status IconThe icon in the upper-right corner of each Set

Setup Pages and Descriptions49 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsAudioThe Audio Page (FIG. 40), accessed by pressing the Audio button

Setup Pages and Descriptions50 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel InformationThe Project Information page displays the TPDesign4

Setup Pages and Descriptions51 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Information Page - Config Tab FIG. 51 Panel Information Page

Setup Pages and Descriptions52 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Information Page - File TabFIG. 52 Panel Information Page - F

Setup Pages and Descriptions53 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsFile Information Page - Project Tab Protected SetupThis button ope

Setup Pages and Descriptions54 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsDate/Time PageThe Date/Time page (FIG. 54) allows setting and altera

Setup Pages and Descriptions55 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsFIG. 55 Set Time pageSet Time PageYear: Use the UP/DN buttons to al

Setup Pages and Descriptions56 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsProtected Setup PageThe Protected Setup page (FIG. 56) centers aroun

Setup Pages and Descriptions57 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsAny use of the Reset Settings or Remove Pages buttons opens up the C

Table of ContentsiiiNXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSystem Settings - Master Tab...

Setup Pages and Descriptions58 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPressing the Function Show button once displays the function informa

Setup Pages and Descriptions59 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSecurity SettingsThe Security button on the Protected Setup page has

Setup Pages and Descriptions60 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSystem Settings PageThe System Settings page (FIG. 60) sets the Seco

Setup Pages and Descriptions61 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSystem Settings Page - IP Tab (Cont.)Domain: Sets the unique name on

Setup Pages and Descriptions62 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSystem Settings - Master TabThe Master tab of the System Settings pa

Setup Pages and Descriptions63 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsSystem Settings - USB Tab FIG. 62 System Settings Page - USB TabS

Setup Pages and Descriptions64 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsCalibrate PageThe Calibrate page (FIG. 63) allows you to calibrate t

Setup Pages and Descriptions65 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsG4 Web Control PageThe G4 Web Control page (FIG. 64) centers around

Setup Pages and Descriptions66 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsRefer to the Using the NetLinx Master to Control the Panel section o

Setup Pages and Descriptions67 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPassword PageThe options on the Password page (FIG. 66) allow you to

iv NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTable of ContentsTPD4 Border Styles by Name ...

Setup Pages and Descriptions68 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Statistics PageThe options on the Panel Statistics page allow

Setup Pages and Descriptions69 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Statistics - Blinks Tab The Blinks Tab tracks blinks, which ar

Setup Pages and Descriptions70 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPanel Statistics - Wired Tab The Wired Tab lists all of the Ethernet

Setup Pages and Descriptions71 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsConnection UtilityThe Connection Utility page (FIG. 70) allows acces

Setup Pages and Descriptions72 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

Programming73 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsProgrammingOverviewThe NXD-430 and NXD-435 may be programmed, using the commands in t

Programming74 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPage Commands (Cont.)@DPG Delete a specific popup page from specified popup group if

Programming75 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPage Commands (Cont.)@PPA Close all popups on a specified page.• If the page name is

Programming76 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPage Commands (Cont.)@PPM Set the modality of a specific popup page to Modal or NonMo

Programming77 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPage Commands (Cont.)@PSE Set the show effect for the specified popup page to the nam

Table of ContentsvNXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels^MDC...

Programming78 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsPage Commands (Cont.)PPOF Deactivate a specific popup page on either a specified page

Programming79 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsProgramming Numbers for Colors, Fonts, and BordersColors can be used to set the color

Programming80 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsFont Styles and ID NumbersFont styles can be used to program the text fonts on button

Programming81 NXD-430/435/435P 4.3” Wall/Flush Mount Touch PanelsTPD4 Border Styles by NameThe TPDesign4 Touch Panel Design program has pre-set border

Programming82 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button CommandsThese Button Commands are used in NetLinx Studio and are

Programming83 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^APF Add page flip action to a button if it does

Programming84 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BCB Set the border color to the specified color

Programming85 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BDO Set the button draw order (determines what

Programming86 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BMC Button copy command - copy attributes of th

Programming87 NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels"^" Button Commands (Cont.)^BMF Set any/all button parameters by sending em