AMX NXD-430-WH Specifications download pdf (Page 44)

Configuring Communication

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

2. Open the IP tab (FIG. 30).

3. Toggle the DHCP/Static field until the choice cycles to DHCP. DHCP will register the unique factory-

assigned MAC Address on the panel, and once the communication setup process is complete, reserve an

IP Address, Subnet Mask, and Gateway values from the DHCP Server.

4. Press the Host Name field to open a keyboard and enter a alpha-numeric string Host Name (optional), and

press Done.

5. Press the Back button to return to the Protected Setup page.

6. Press the Reboot button to save any changes and restart the panel.

Once the panel is rebooted, the remaining IP values are obtained by the unit and displayed in the

DNS fields after power-up.

This information can be found in either the: Workspace- System name > Define Device section of

the code that defines the properties for the panel, or in the Device Addressing and Network

Addresses dialogs in NetLinx Studio.

FIG. 29 Protected Setup Page

FIG. 30 System Settings Page - IP Tab

Press to access the System Settings page

Red fields are user-editable

Blue fields cycle through choices

Grey fields are read-only

1 ... 43 44 45 ... 146

No comments

AMX NXD-430-WH Specifications Page 44