AMX NXD-430-WH Specifications Page 24
- Page / 146
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installation
12
NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels
Installing the NXD-430 panel within a Rough-In Box
The Rough-In Box must be mounted prior to continuing this section. Refer to the procedures in the
Pre-Wall Installation of the Rough-In Box section on page 10 for detailed pre-wall installation instructions.
1. Remove the faceplate from the main NXD-430 unit by gripping the faceplate from the top and lifting up
and then pulling with gentle outward force.
2. Disconnect the capacitive touch connector from the 10-pin plug on the faceplate.
3. Thread the incoming Ethernet and USB wiring from their terminal locations through the surface opening.
Leave enough slack in the wiring to accommodate any re-positioning of the panel.
4. Push the back box into the wall opening. Ensure that the locking tabs lie flush against the back box.
5. Connect both connectors to their corresponding locations along the left side of the touch panel.
6. Test the incoming wiring by attaching the panel connections to their terminal locations and applying
power via the PoE Injector.
Verify that the panel is receiving power and functioning properly to prevent repetition of the
installation.
Test the incoming wiring by connecting the panel connections to their terminal locations and
applying power via the PoE Injector.
Verify that the panel is receiving power and functioning properly to prevent repetition of the
installation.
Verify that all necessary cables have been threaded through the knockouts on the left
of the Rough-In Box and the connections have been tested prior to installation of the
NXD-430.
FIG. 8 NXD-430 panel installation into a CB-TP5i (pre-wall construction)
Main NXD-430 unit consists of
Optional CB-TP5i
Stud
the touch panel and back box housing
rough-in/wallbox
Screws for mounting
Back Box to touch panel
Locking Tab
Be sure to pull the faceplate UP before pulling it out and away from the rest of the
device. Pulling straight outward may lead to damage to the faceplate, including
breaking off the tabs that attach the faceplate to the device and damaging the
capacitive touch 10-pin female connector.
- NXD-430/435/435P 1
- Table of Contents 10
- Introduction 13
- Product Specifications 14
- Common Application 16
- Features 16
- NXD-435 Specifications 17
- Side Connectors 20
- Capacitive Touch Buttons 20
- Installation 21
- RJ-45 wiring diagram 30
- PS-POE-AF PoE Injector 31
- Panel Calibration 33
- Touch Panel Calibrate Screens 34
- Configuring Communication 35
- System Settings page 37
- USB Properties windows 40
- 2. Open the IP tab (FIG. 30) 44
- Connection Details dialog 52
- Upgrading Modero Firmware 53
- Protected Setup button 54
- Setup Pages and Descriptions 59
- Connection Status Icon 60
- Display Page (Cont.) 61
- Audio Page 61
- Panel Information 62
- Protected Setup 65
- Date/Time Page 66
- Set Time Page 67
- Protected Setup Page 68
- Protected Setup Page (Cont.) 69
- Security Settings 71
- System Settings Page 72
- System Settings Page - IP Tab 72
- System Settings - Master Tab 74
- System Settings - USB Tab 75
- Calibrate Page 76
- G4 Web Control Page 77
- Password Page 79
- Panel Statistics Page 80
- Panel Statistics - ICSP Tab 80
- Connection Utility 83
- Programming 85
- Page Commands (Cont.) 86
- Font Styles and ID Numbers 92
- TPD4 Border Styles by Name 93
- Text Effects 113
- Button Query Commands 114
- Button Query Commands (Cont.) 116
- Panel Runtime Operations 123
- Input Commands 127
- Embedded Codes 128
- Panel Setup Commands 129
- Dynamic Image Commands 130
- ^RAF, ^RMF - Embedded Codes 131
- Embedded Code 132
- ’%R <refresh 1-65535>’ 132
- ’%N <0-1>’ 132
- ’%V <0-1>’ 132
- Troubleshooting 133
- Appendix A - Text Formatting 137
- Text Area Input Masking 138
- Input Mask Ranges 139
- Input Mask Operations 139
- Input Mask Literals 139
- URL Resources 140
- Special Escape Sequences 141
- Overview 143
Related products and manuals for Touch screen monitors AMX NXD-430-WH
Touch screen monitors AMX NXT-CV7 Specifications
(220 pages)
(220 pages)
Touch screen monitors AMX NXT-CA7 Specifications
(152 pages)
(152 pages)
© 2020, manymanuals.com. All rights reserved. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals