AMX NXD-430-WH Specifications download pdf (Page 17)

Introduction

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

This panel includes a mini-USB port for programming, one main NetLinx-programmable button, and four

smaller buttons. All five buttons utilize capacitive touch, where the button reacts with the electrical

conductivity of the user’s skin.

For more information, please refer to the Capacitive Touch Buttons section on page 8.

Key features include:

Support of AMX's 4th generation (G4) graphics which provide higher brightness, richer colors, and

deeper contrast. The G4 graphics technology is supported by the TPDesign4 Touch Panel Design

application, available for download from www.amx.com.

Display of images on a large 16:9 image format, while providing a wide 80/80/60/80 viewing angle.

Upgradable firmware that can be uploaded via the mini-USB port in the back of the device.

NXD-435 Specifications

The specifications for the NXD-435 4.3" Modero Touch Panel (FG2262-03/04) include:

NXD-435 (FG2262-03/04) Specifications

Dimensions (HWD): • NXD-435 (with faceplate): 4.13" x 5.5" x 2.13" 

(10.48 cm x 13.97 cm x 5.40 cm)

• CB-TP5i Rough-In/Wallbox (optional): 4.27" x 5.14" x 3.40" 

(10.86 cm x 13.06 cm x 8.64 cm)

Weight: 0.65 lbs (0.29 kg)

Power Requirements: • PoE Powered - No local Power Supply supported.

• Max power draw: 5.5W.

Memory (factory default): • 128 MB SDRAM

• 256 MB integrated Flash Memory (not upgradeable - factory programmed)

Panel LCD Parameters: • Aspect ratio: 16 x 9

• Maximum brightness (luminance): 200 cd/m

• Channel transparency: 8-bit Alpha blending

• Contrast ratio: 250:1

• Display colors: 256 thousand colors (18-bit color depth)

• Dot/pixel pitch: 0.14 mm

• Panel type: WQVGA

• Screen resolution: 480 x 262 pixels (HV) @ 60 Hz frame frequency

• Viewing dimensions: 2 3/16" x 3 13/16" (5.56 cm x 9.68 cm)

Active Screen Area: 2 1/8" x 3 3/4" (5.40 cm x 9.53 cm)

Viewing Angles: Left/Right/Up/Down: 80/80/60/80

Front Panel Components:

Front Setup Access Button: • Provides both access to the Setup and Calibration page and toggles the

panel between a "sleep" or "wake" state. "Sleep" status means the backlight

is Off.

Capacitive touch buttons: • Allow NetLinx-programmable actions when pressed.

Ethernet 10/100 port: • RJ-45 port for 10/100 Mbps communication. The Ethernet port automatically

negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use

half duplex or full duplex mode. Power is supplied through Power Over

Internet (PoE)

• NXD-435 panels communicate with the NetLinx Master using the ICSP

protocol over Ethernet.

• LEDs show communication activity, connections, speed, and mode

information:

L/A-link/activity - yellow LED lights On when the Ethernet cables are

connected and terminated correctly and then blinks when receiving Ethernet

data packets.

SPD-speed - Green LED lights On when the connection speed is 100 Mbps

and turns Off when the speed is 10 Mbps.

1 ... 16 17 18 ... 146

Comments to this Manuals

No comments

AMX NXD-430-WH Specifications Page 17

Comments to this Manuals

Related products and manuals for Touch screen monitors AMX NXD-430-WH