Introduction
6
NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels
NXD-435 (FG2262-03/04) Specifications (Cont.)
Mini-USB connector: 5-pin Mini-USB connector used for programming, firmware update, and touch
panel file transfer between the PC and the target panel.
Note: When connecting the panel to PC using a CC-USB (or compatible) cable,
be sure to power the panel On before attempting to connect the USB cable
from the PC to the mini-USB port on the panel. Refer to the Configuring and
Using USB with a Virtual Master section on page 25 for more information.
Button Assignments: Button assignments can only be adjusted in TPD4 and not on the panel.
• Button channel range: 1 - 4000 button push and feedback (per address port)
• Button variable text range: 1 - 4000 (per address port)
• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
• Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535)
• Address port range: 1 - 100
Certifications: • FCC Part 15 Class B
•CE
• IEC 60950
•RoHS
Operating / Storage
Environment:
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 5% - 85% relative humidity (non-condensing)
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Included Accessories: • NXD-435 Installation Guide (93-2262-01)
Other AMX Equipment: • CB-TP5i Rough-In/Wallbox (FG038-11)
• Back Cover for CB-TP5i Rough-In/Wallbox (FG038-12)
• NXA-BEZP-430 Portrait Bezel Kit for the NXD-430 (FG2262-10/11)
• NXA-SMT43X Surface Mount Box, White (FG2262-16)
• NXA-TTS43X Table Top Stand(FG2262-40)
• PS-POE-AF PoE Injector (FG423-80)
• CC-USB Type-A to Mini-B 5-wire programming cable (FG10-5965)
• NXA-RK5 Rack Mount Kit for 5" Wall Mount panels (FG2904-55):
- 5" Rackmount
- Four Screws, #10-32 x.625, PH Truss, BLK
- Four Washers, #10, Black Nylon
- Three Screws, #4-40 x.250, PPH, BLK
Comments to this Manuals