AMX NXD-430-WH Specifications download pdf (Page 60)

Setup Pages and Descriptions

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

Connection Status Icon

The icon in the upper-right corner of each Setup page shows the current state of the panel’s connection to the

Master. The Connection Status Icon provides a visual update of the panel’s connection status, regardless of

what page is currently active.

Red - Panel is disconnected from the Master.

Green - Panel is connected to the Master. Blinks when a blink message is received.

Yel low - Panel missed a blink message from the Master. It will remain yellow for 3 missed blink

messages, then turns red. It will return to green when a blink message is received.

Display

The Display Page (FIG. 48), accessed by pressing the Display Settings button on the Setup page, allows

adjustment of the default panel settings.

Setup Page (Cont.)

Protected Setup: This button opens the Protected Setup page (page 47).

Time: This button opens the Date & Time page (page 54).

Back: Returns to the Main touch panel page. In this case, the previous page is the

default Main page.

A Lock icon appears on the icon if the panel has established a connection with a

currently secured target Master (requiring a username and password).

FIG. 48 Display Page

Display Page

Connection Status 

icon:

Shows the current state of the panel’s connection to the Master (green = online, red =

offline). See the Connection Status Icon section on page 48 for details.

Panel Brightness: Sets the display brightness level of the panel.

• Press the UP/DN buttons to adjust the brightness level. Range = 0 - 100.

• The on-screen bargraph can be dragged to adjust the Brightness level which is then

reflected as a corresponding numeric value within the Panel Brightness field.

Display Timeout: Sets the length of time the panel can remain idle before activating the sleep mode.

When the device goes into sleep mode, the LCD is powered down.

• Press the UP/DN buttons to increase/decrease the time until the panel times out.

Range = 0 - 240 minutes.

• Use this button to set the timeout value to zero and disable the sleep mode.

1 ... 59 60 61 ... 146

No comments

AMX NXD-430-WH Specifications Page 60