AMX NXD-430-WH Specifications download pdf (Page 45)

Configuring Communication

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

IP Settings section - Configuring a Static IP Address over Ethernet

1. The System Settings page (IP tab), toggle the DHCP/Static button until the choice cycles to Static (see

FIG. 30 on page 32).

2. Press the IP Address button to open a keyboard and enter the Static IP Address provided by your System

Administrator., and press Done.

3. Repeat the same process for the Subnet Mask and Gateway fields.

4. Press the Host Name field to open a keyboard and enter a alpha-numeric string Host Name (optional), and

press Done.

5. Press the Primary DNS field to open a keyboard, enter the Primary DNS Address provided by your

System Administrator, and press Done. Repeat this process for the Secondary DNS field.

6. Press the Domain field to open a Keyboard, enter the resolvable domain Address provided by your

System Administrator, and press Done.

7. Open the Master tab to begin configuring the communication parameters for the target Master.

Step 2: Choose a Master Connection Mode Setting

The Master tab of the System Connection page uses three (Master Connection) Mode settings (FIG. 31).

The (Master Connection) Mode options are as follows:

URL is the address that defines the route to a file on the Web or any other Internet facility. In this

system, the panel acts as a "Client" and the Master acts as a Server (in that Clients attach to it).

URL (Uniform Resource Locator) is the most commonly used method.

LISTEN sets the Modero panel to "listen" for broadcasts from the Master (using the panel IP from

its URL list). In this system, the panel acts as a "Server" (in that Clients attach to it) and the Master

acts as a "Client".

AUTO is used to instruct the Modero to search for a Master that uses the same System Number

(assigned within the Master Connection section) and resides on the same Subnet as itself. In this

case, the Master has its UDP feature enabled. This UDP (User Datagram Protocol) is a protocol

within the TCP/IP protocol suite that is used in place of TCP when a reliable delivery is not

required. This UDP enabling is done through a Telnet session on the Master.

Refer to the installation manual for the particular NetLinx Master for more detailed information.

Check with your System Administrator for a pre-reserved Static IP Address assigned

to the panel. This address must be obtained before Static assignment of the panel

continues.

FIG. 31 System Settings page - Master Tab

1 ... 44 45 46 ... 146

No comments

AMX NXD-430-WH Specifications Page 45