AMX NXD-430-WH Specifications download pdf (Page 77)

Setup Pages and Descriptions

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

G4 Web Control Page

The G4 Web Control page (FIG. 64) centers around enabling and disabling both the display and control of your

panel via the Web. An external PC running a VNC client, installed during the initial communication to the G4

panel, makes this possible.

Each panel supports the open standard Virtual Network Computing (VNC) interface. These panels contain a

VNC server that allows them to accept a connection from any other device running a VNC client. Once a

connection is established to that target device, the client can control the touch panel remotely.

FIG. 64 G4 Web Control Settings page

G4 Web Control Settings Page

Connection Status

icon:

Shows the current state of the panel’s connection to the Master (green = online, red =

offline). See the Connection Status Icon section on page 48 for details.

Enable/Enabled: The Enable/Enabled button allows you to toggle between the two G4 activation set-

tings:

• Enable - deactivates the G4 Web Control feature on the panel.

• Enabled - activates the G4 Web Control feature on the panel and allows an

external PC running a VNC client to access the panel after the remaining fields are

configured.

Timeout: Sets the length of time (in minutes) the panel can remain idle (no cursor movements)

before the session is closed and the user is disconnected.

• Minimum value = 0 minutes (panel never times-out)

• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)

Network Interface: Displays the detected method of communication to the web.

Wired is used when a direct Ethernet connection is being used for communication to

the web. This is a default setting.

Control Name: Allows entry of a unique alphanumeric string used as the display name of the panel

within the Manage WebControl Connections window of the new NetLinx Security

browser window.

• This Web Control tab displays a G4 icon alongside the link to the Web Control

Name given to this panel (FIG. 65).

Control Password: Allows entry of the G4 Authentication session password associated for VNC web

access of this panel.

Control Port: Allows entry of the VNC Web Server’s port value.

• Default value = 5900.

Max Connects: This read-only field displays the maximum number of users that can be connected

simultaneously to the target panel via the Web.

• Default value = 1.

1 ... 76 77 78 ... 146

No comments

AMX NXD-430-WH Specifications Page 77