AMX NXD-430-WH Specifications download pdf (Page 47)

Configuring Communication

NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels

2. Click the Communications Settings button to open the Communications Settings dialog (FIG. 34).

3. Click on the NetLinx Master option under Platform Selection section to indicate that you are working as

a NetLinx Master.

4. Click on the Virtual Master option under Transport Connection Option to indicate you are wanting to

configure the PC to communicate with a panel. All other fields will be greyed out because the Master’s UI

is not being used.

5. Click the Edit Settings button to open the Virtual NetLinx Master Settings dialog (FIG. 35).

6. Enter the System number (default is 1) and note the IP Address of the target PC being used as the Virtual

Master.

This IP Address can be obtained by following these procedures:

FIG. 33 NetLinx Studio - Master Communication Settings dialog

FIG. 34 NetLinx Studio - Communication Settings dialog

FIG. 35 NetLinx Studio - Virtual NetLinx Master Settings dialog

1 ... 46 47 48 ... 146

No comments

AMX NXD-430-WH Specifications Page 47