AMX NXD-430-WH Specifications Page 22
- Page / 146
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installation
10
NXD-430/435/435P 4.3” Wall/Flush Mount Touch Panels
4. To install a new faceplate, rejoin the capacitive touch connector to the male 10-pin connector on the new
faceplate and place it back onto the device. Be careful not to break the two prongs at the top of the device.
Installation of an NXD-430 or NXD-435 Touch Panel
The NXD-430 and NXD-435 can be installed either directly into the (optional) CB-TP5i Rough-In Box or into
another solid surface environment, using solid surface screws or the included locking tabs as mounting
options. The following sections describe mounting the touch panel directly into a pre-wall rough-in box, a
solid surface, drywall, or an NXA-RK5 Rack Mount Kit.
Pre-Wall Installation of the Rough-In Box
The CB-TP5i Rough-In Box (FG038-11) is an optional metallic box that is secured onto a stud/beam in a
pre-wall setting, where no walls are present. Installation procedures and configurations can vary, depending
on the installation environment.
This section describes the installation procedures for the most common installation scenarios.
1. Attach the optional Back Cover for the CB-TP5i (FG038-12) if necessary.
2. Fasten the CB-TP5i Rough-In Box to the stud through the holes on the Stud Mounting tabs (FIG. 7),
using either nails or screws.
FIG. 6 View of NXD-435 with faceplate removed
10-pin connector
(female)
Top Prongs
While the faceplates of the NXD-430 and NXD-435 can be replaced with another of a
different color, the faceplate for an NXD-430 cannot be used for an NXD-435 and vice
versa.
Each device detects whether the faceplate installed onto the front is of the correct
type, and the device’s buttons will not function if an incorrect faceplate is installed.
In order to guarantee a stable installation of the NXD-430 or NXD-435, the distance
between the CB-TP5i and the outer wall surface must be a minimum of .50 inches
(1.27cm) and a maximum of .875 inches (2.22cm).
Cutting out the surface slightly smaller than what is outlined in the installation
drawings, to allow any necessary cutout adjustments, is highly recommended.
- NXD-430/435/435P 1
- Table of Contents 10
- Introduction 13
- Product Specifications 14
- Common Application 16
- Features 16
- NXD-435 Specifications 17
- Side Connectors 20
- Capacitive Touch Buttons 20
- Installation 21
- RJ-45 wiring diagram 30
- PS-POE-AF PoE Injector 31
- Panel Calibration 33
- Touch Panel Calibrate Screens 34
- Configuring Communication 35
- System Settings page 37
- USB Properties windows 40
- 2. Open the IP tab (FIG. 30) 44
- Connection Details dialog 52
- Upgrading Modero Firmware 53
- Protected Setup button 54
- Setup Pages and Descriptions 59
- Connection Status Icon 60
- Display Page (Cont.) 61
- Audio Page 61
- Panel Information 62
- Protected Setup 65
- Date/Time Page 66
- Set Time Page 67
- Protected Setup Page 68
- Protected Setup Page (Cont.) 69
- Security Settings 71
- System Settings Page 72
- System Settings Page - IP Tab 72
- System Settings - Master Tab 74
- System Settings - USB Tab 75
- Calibrate Page 76
- G4 Web Control Page 77
- Password Page 79
- Panel Statistics Page 80
- Panel Statistics - ICSP Tab 80
- Connection Utility 83
- Programming 85
- Page Commands (Cont.) 86
- Font Styles and ID Numbers 92
- TPD4 Border Styles by Name 93
- Text Effects 113
- Button Query Commands 114
- Button Query Commands (Cont.) 116
- Panel Runtime Operations 123
- Input Commands 127
- Embedded Codes 128
- Panel Setup Commands 129
- Dynamic Image Commands 130
- ^RAF, ^RMF - Embedded Codes 131
- Embedded Code 132
- ’%R <refresh 1-65535>’ 132
- ’%N <0-1>’ 132
- ’%V <0-1>’ 132
- Troubleshooting 133
- Appendix A - Text Formatting 137
- Text Area Input Masking 138
- Input Mask Ranges 139
- Input Mask Operations 139
- Input Mask Literals 139
- URL Resources 140
- Special Escape Sequences 141
- Overview 143
Related products and manuals for Touch screen monitors AMX NXD-430-WH
Touch screen monitors AMX NXT-CV7 Specifications
(220 pages)
(220 pages)
Touch screen monitors AMX NXT-CA7 Specifications
(152 pages)
(152 pages)
© 2020, manymanuals.com. All rights reserved. | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals