AMX RADIA LIGHTING CONTROL ENCLOSURE WORKSHEET GUIDE Specifications Page 79
- Page / 80
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
10. Glossary
Rain Bird
®
ET Manager Series - Installation and Operation Manual 79
Weather Region: The weather region number repre-
sents a weather station assigned by the Weather Reach
Signal Provider (WRSP). The weather region you pro-
gram in your ET Manager should correspond to a
weather station that closely represents the location of
the ET Manager. The WRSP assigns each weather sta-
tion a weather region number.
Weather Signal: A Weather Reach Signal Provider
(WRSP) retrieves weather information from local
weather stations. The information is broadcast as a
weather signal via a paging radio frequency to your ET
Manager. The weather signal contains the most recent
weather conditions including: solar energy, tempera-
ture, wind, humidity, and rainfall.
Wind Adjust: The wind speed measurement included
in the weather signal can be scaled by a percentage to
compensate for variations in prevailing conditions
using the wind adjust setting.
Wind Interrupt: If the hourly weather signal contains
wind speeds that reach the Wind Interrupt setting,
watering is interrupted. The Weather Interrupt is can-
celled once the wind speed decreases below the pro-
grammed Wind Interrupt setting.
WRSP: An abbreviation for Weather Reach Signal
Provider.
Rain Bird’s Professional Customer Satisfaction Policy
Rain Bird will repair or replace at no charge any Rain Bird professional product that fails in normal use within the warranty period
stated in the Rain Bird Landscape Irrigation Products Catalog. You must return said product to the dealer or distributor where you
bought it. Product failures due to acts of God including without limitation, lightning and flooding, are not covered by this warranty.
This commitment to repair or replace is our sole and total warranty.
Implied warranties of merchantability and fitness, if applicable, are limited to one year from the date of sale.
We will not, under any circumstances be liable for incidental or consequential damages, no matter how they occur.
The ET Manager comes with default settings. These settings can be overridden when a Rain Bird Distributor programs site specific
settings. Settings entered by the Rain Bird Distributor are programmed as probable initial settings. Many conditions affect each of
the above settings. The Installer, Distributor, Weather Signal Provider or Rain Bird makes no guarantee that these settings or the
default settings correctly meet the needs for any specific site. The Owner will need to adjust settings to meet specific site condi-
tions.
The Weather Reach Signal Provider (WRSP) accesses weather data from local weather stations and contracts with a paging service
company. The WRSP operates independent of the Installer, Distributor, paging company and Rain Bird. Neither the Installer, nei-
ther the paging company, neither Distributor nor Rain Bird are responsible for the weather data transmitted by the WRSP. Weather
conditions can vary; the WRSP does not represent the weather signal data to precisely represent actual site conditions. The Owner
will need to monitor site conditions and adjust the sprinkler system to meet the water requirements of the landscape. By installing
the ET Manager, the Owner agrees to hold all above parties harmless in the event any condition arising from the use of this device
causes any damage.
- ET Manager Series 1
- Table of Contents 2
- 1. Introduction 3
- The Weather Reach Water 4
- Management System 4
- Getting to Know your 5
- Rain Bird ET Manager 5
- LCD Contrast 6
- Attention Indicator Light 6
- Specifications 7
- Resource CD Included with 8
- Getting Ready to use 8
- Your ET Manager 8
- Mounting 10
- Wire Connections 11
- 4” insulation off the ends 12
- Wiring Diagrams 13
- Optional Rain Gauge 13
- 2. Installation 14
- Optional External Antenna 15
- Install Battery 16
- 3. Programming 17
- Weather Region 18
- Rain Source 18
- Elevation 18
- Signal Provider Code 18
- 2. Output Method 19
- Output Method 19
- 3. Site Specific Settings 19
- Irrigation Control 19
- Weather Interrupt 23
- System Options 24
- Programming the Sprinkler 25
- Controller 25
- Cycle Start Times 26
- Station Run Times 26
- 4. System Check 27
- Override 28
- Weather Signal Test 28
- Valve Control Test 29
- Water Window Settings 29
- Initial Moisture Levels 29
- 5. Routine Operation 30
- Irrigation Status 31
- 5. Routine Operations 32
- Information Log 33
- Status Messages 34
- Attention Messages 35
- No Paging Signal 37
- Signal Accuracy 38
- No Historical ET Data 39
- Decoder Failure 39
- No Watering Detected 39
- Rain Tip Input Failure 39
- Set Signal Provider Code 40
- Window Overlaps Off Day 40
- 6. Determining 41
- Programmable Settings 41
- Rain Bird 42
- Landscape Conditions 43
- Plant Type 43
- Soil Type 43
- Root Depth 43
- ET Manager Settings 44
- Water Window 45
- Available Days 46
- Advanced Settings 46
- Effective Rain Settings 46
- ET Manager Scheduler 47
- 7. Troubleshooting 48
- Water Management 49
- Troubleshooting 49
- Group are too dry or too wet 50
- 8. Advanced Output Methods 53
- Wiring “A Then B” 54
- ET & Rain Pulse 55
- Wiring ET and Rain Pulse 56
- Using More than One Sprinkler 59
- 9. Appendices 60
- Precipitation Rate 65
- Station Run Time 65
- Master Valve Control 70
- Pump Control 72
- 10. Glossary 73
- The Intelligent Use of Water 80
© 2020, manymanuals.com. All rights reserved. | 0.059 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals