AMX RADIA LIGHTING CONTROL ENCLOSURE WORKSHEET GUIDE Specifications download pdf (Page 48)

7. Troubleshooting

Rain Bird

ET Manager Series - Installation and Operation Manual 48

7. Troubleshooting

If you have questions or problems with your ET

Manager or sprinkler system, this chapter will guide

you through possible scenarios that should be consid-

ered. The ET Manager Status Report Worksheet,

Appendix IX, will help you identify possible errors in

programming.

If you are unable to troubleshoot a situation, please

contact your installer, Rain Bird Authorized Distributor

or Rain Bird Customer Service at

www.rainbird.com/etmanager or call Rain Bird

Technical Services at 1-877-351-6588.

The following conditions are included in this chapter:

ET Manager Troubleshooting:

• The Display is blank.

• The Attention Indicator Light is on.

• The Valve Group Indicator Light(s) is red and

my ET Manager will not let the sprinklers

come on.

• The ET Manager is in Override, how do I stop it?

Water Management Troubleshooting:

• How often should my sprinklers come on?

• Evaluate your landscape.

• Are there dry or wet spots in your

landscape?

• Specific stations within the Valve Group are

too dry or too wet.

• Most stations within the entire Valve Group

are too dry or too wet.

• The site is watered every day.

• You want your sprinkler system to water on the

next cycle.

• After a rainstorm it resumes watering too soon.

• After a rainstorm it does not resume watering

soon enough.

• It was raining and the sprinklers were running.

ET Manager Troubleshooting

The Display is blank.

1. Verify your ET Manager is connected and get-

ting power.

2. LCD Display contrast may need to be adjusted.

Press

Ã ten times to get to the LCD contrast

screen. Then use

Œ or Õ to adjust the con-

trast. You may have to press and hold the

Œ or

Õ for 10 seconds or until the LCD is readable.

3. If steps 1 and 2 do not work, reset your ET

Manager by disconnecting the power, and

restore the power after 15 seconds.

4. If your ET Manager display remains blank,

please contact your installer or Rain Bird.

The Attention Indicator Light is on.

On the Home screen,

a message will appear

explaining the

Attention condition.

Refer to chapter 5,

Routine Operation,

for information on

each Attention condition.

The Valve Group Indicator Light(s) is red

and my ET Manager will not let the

sprinklers come on.

If the A or B Indicator Light is red, your ET Manager is

interrupting the output of the sprinkler controller.

Press the Override button, and the Valve Group A and B

Indicator Lights will turn green enabling sprinkler out-

put. Your sprinkler controller can now be used to man-

ually start a valve.

An Override will allow watering for one hour, if more

time is needed press the Override button again or press

Œ for each additional hour of Override. Once the over-

1 ... 47 48 49 ... 80

Comments to this Manuals

No comments

AMX RADIA LIGHTING CONTROL ENCLOSURE WORKSHEET GUIDE Specifications Page 48

Comments to this Manuals