3. Programming
4. Additional Settings and Options
Additional settings are programmed to facilitate general
use of your ET Manager. From Settings in the Main
Menu access:
• System Options
• Date and Time
System Options
Main Menu Settings Systems Options
There are four Options:
• Units
• Password
• Clear Data
• Defaults
Units
Main Menu
Settings Systems Options
Units
ET Manager can operate in either English units or met-
ric units. To change navigate the menus to units, and
use the
Œ or Õ buttons to make the change.
Password
Main Menu Settings Systems Options
Password
To limit access to the Settings menu a password may be
set. To program a password, use Œ or Õ to select the
desired numeric password. The value can be set from 1
to 255, or none. Once set, the password must be used
to gain access to the Settings menus. A password set-
ting of “None” disables password protection. None is
found by scrolling one down from the numeric value 1.
Clear Data
Main Menu
Settings Systems Options
Clear Data
If it becomes necessary, you may clear all records stored
in the ET Manager. Clearing Data will not change set-
tings, but will erase all weather information, the current
time and date, and will automatically set your Moisture
Levels to 0, enabling watering.
To clear data, navigate the menus to the Clear Data
screen, use the
Õ to select “Yes.” Push the À but-
ton to confirm your decision.
Defaults
Main Menu
Settings Systems Options
Defaults
There are two options from the Defaults menu:
• Save Defaults
• Restore Defaults
Save Defaults
To save the current ET Manager settings as defaults,
select Save Defaults then press
À. You will then need
to push
Õ so the cursor is on “Yes” and push À to
confirm your decision.
The defaults settings that can be saved are:
• Settings
• Irrigation Control
• Irrigation Amount and Landscape
Adjustment % for Valve Group A and B
• Water Window
• Automatic
• Daily
• Available Watering Days
• All, Odd, Odd with 31st Off, Even,
Custom Days
• Advanced Setting
• Effective Rain Settings
Rain Bird
®
ET Manager Series - Installation and Operation Manual 24
Comments to this Manuals