AMX RADIA LIGHTING CONTROL ENCLOSURE WORKSHEET GUIDE Specifications download pdf (Page 20)

3. Programming

Rain Bird

ET Manager Series - Installation and Operation Manual 20

Refer to Determining Programmable Settings, chapter

6, for more information on determining the values for

the Irrigation Amounts and Landscape Adjustment

Percentages.

Navigate to Irrigation Amount & Adjust, and press

À.

The cursor will be pointing to Irrigation Amount. Now

press

À once to position the cursor to the “A.” Use Œ

or Õ to choose between A and B. Press À when the

cursor is in front of the valve group you would like to

adjust. Use

Œ or Õ to adjust the Irrigation Amount for

A and B. Once the Irrigation Amount is adjusted, use

Ã twice to get back to the Irrigation Amount field.

Note: If only one of the two Valve Groups is used, you

can “turn off” the remaining Valve Group by program-

ming the Irrigation Amount to zero.

To set the Landscape Adjustment, press Õ placing the

cursor in front of Landscape Adjustment. Press

once to position the cursor to the “A” and twice to posi-

tion the cursor to the B value. Use

Œ or Õ to adjust

the Landscape Adjust for A and B.

Water Window

Main Menu Settings Irrigation Control

Water Window

The ET Manager Water Window needs to be synchro-

nized with the first sprinkler controller start time and

the length of all watering cycles. There are two Water

Windows used to manage the system:

• Automatic Window: The period of time that

the ET Manager controls watering cycles based

on ET.

• Daily Window: An optional period when

watering occurs as programmed in the sprin-

kler controller as non-ET based watering

schedules not controlled by the ET Manager.

During this period of time, watering will not be

controlled by the ET Manager.

To avoid overlapping between the Automatic and Daily

Windows, the ET Manager restricts at least one hour

separation between the beginning and ending of each

Water Window. If there is no Daily Window pro-

grammed, the Daily Window time range will be dis-

played as “Off.”

There are two steps to program the Automatic Window:

1. Program the

beginning of the

Automatic

Window. The

position of the

cursor will be at

Automatic Window. Press

À to move the

cursor to the opening time of the Automatic

Window. Use

Œ or Õ to set the opening time,

synchronized to the first start time pro-

grammed in the sprinkler controller.

2. Press

À to pro-

gram the end of

the Automatic

Window. Use

or Õ to set the

length of time for

the Automatic Window. The Automatic

Window should be the total length of time it

takes to complete all watering cycles. When fin-

ished, press

Ã twice to exit from the

Automatic Window.

The steps to programming the Daily Window are simi-

lar to programming the Automatic Window.

Note: If you do not want

to program a Daily

Window, set your start

time and ending time to

the same hour, and OFF

will appear under the

Daily Window.

Note: The display changes from the closing time to a

length of time when programming the Water Window

settings. For example, if the Automatic Window is set

1 ... 19 20 21 ... 80

Comments to this Manuals

No comments

AMX RADIA LIGHTING CONTROL ENCLOSURE WORKSHEET GUIDE Specifications Page 20

Comments to this Manuals