AMX RADIA LIGHTING CONTROL ENCLOSURE WORKSHEET GUIDE Specifications Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
3. Programming
Rain Bird
®
ET Manager Series - Installation and Operation Manual 21
from 10:00 pm to 8:00 am, once you press à your ET
Manager will display 10:00 pm for 10 hours.
Note: Use a separate sprinkler controller program for
non-ET based watering schedules.
Available Watering Days
Main Menu Settings Irrigation Control
Available Watering Days
The days available for watering can be programmed in
your ET Manager or your sprinkler controller. Typically
Available Watering Days are set to all” or everyday. The
days available for watering could be limited because of
scheduled maintenance, facility use, or local watering
restrictions.
To program the Available Days go to the Available Days
screen, press
À, and use Œ or Õ to position the cur-
sor on the selected option. Watering days can be set to:
All: Water on any day of the week.
Even: Water only on even days of the week.
Odd: Water only on odd days of the week.
Odd Off 31: Water only on odd days of the
week, and watering will not occur on the 31
st
of the month.
Custom: The
user can limit the
days of the week
that watering can
occur. When
choosing custom,
press
À to advance to the next screen. On
these screens selected days can be turned “On
or “Off.” Use the arrow keys to select the
desired day, and then use
À to move the
cursor to the “On” or “Off” setting. Use
Œ or
Õ to toggle between On” or “Off.” Use à to
go back. Repeat for all days, advance to the
next screen and continue until all days are
programmed.
Look-Ahead Feature: If Available Days is not pro-
grammed to All” and specific days are not available,
the ET Manager looks ahead to determine if watering
should occur even though the Moisture Level has not
reached “0.
When the Automatic Window opens, it checks to see if
the next watering day is an available water day. If the
next day is a “No Water Day” and it determines that
watering would most likely occur on that day, watering
will be enabled. The ET Manager looks at the current
Moisture Level and current ET and allows watering,
even if the Moisture Level has not reached “0.”
Note: When restricting available watering days, the
Water Window must begin and end either before mid-
night, or after midnight. If your Water Window is pro-
grammed to run through midnight, you must set avail-
able days to all in the ET Manager. You can still pro-
gram off days by turning days off on your sprinkler con-
troller. A sensor built into your ET Manager will recog-
nize off days scheduled into your sprinkler controller.
The Look-Ahead Feature will not function.
Note: Available days can affect the Daily Window set-
ting. If days are restricted, the Daily Window does not
allow watering on the restricted day.
Advanced Settings
Main Menu Settings Irrigation Control
Advanced Settings
The Advanced Settings menu provides additional con-
trol features using the ET Manager. These settings
include:
Effective Rain
Signal Crop Coefficient
Wind Adjust %
Historical ET
Page view 20
1 ... 20 21 22 ... 80

Comments to this Manuals

No comments