AMX RADIA LIGHTING CONTROL ENCLOSURE WORKSHEET GUIDE Specifications Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
5. Routine Operations
Rain Bird
®
ET Manager Series - Installation and Operation Manual 33
Access Moisture Levels for A or B
Main Menu
Irrigation Status
A (or B) Moisture Level
The following information is shown on this screen:
Irrigation Amount: The amount of water
applied by the sprinkler system to refill the soil
moisture reservoir.
Current Level: The current calculated mois-
ture level for A (or B).
Moisture Level Graphic: On the right the
graphic represents the current moisture level.
When the “soil” is empty” it is time to water.
Watering is not needed until the Moisture level
reaches zero.
Graph: Press
À to display a graph that rep-
resents the soil moisture level over the last two
weeks.
Adjusting the Current Level: There may be circum-
stances when the current level needs to be adjusted,
like during Valve Group testing, delaying watering, or
troubleshooting. Use
Œ or Õ to make the change.
Increasing this value may delay watering. By taking the
value to zero watering will be allowed on the next
scheduled cycle.
Rain
Main Menu Weather Info Rain
The rain screen displays rainfall values measured from
the selected rain source. The ET Manager stores four-
teen days of information, which can be viewed in the
graph. The following detail is displayed:
Last Hour: Total measured rainfall in the last
hour recorded broadcast.
Last 24 Hours: Total measured rainfall in the
last 24 hours.
Last 7 Days: Total measured rainfall in the last
7 days.
Graph: Press
À to view the rain graph for
the last two weeks.
Evaporation (ET)
Main Menu Irrigation Status ET
The ET screen displays the ET calculated by the ET
Manager based on current settings and the weather
conditions included in the weather signal. The ET
Manager stores fourteen days of information, which
can be viewed in the graph. The following detail is dis-
played:
Last Hour: ET based on data in the last hour
recorded broadcast.
Last 24 Hours: Total ET in the last 24 hours.
Last 7 Days: Total ET in the last 7 days.
Signal Kc: Signal crop coefficient percentage
included in the weather signal.
Graph: Press
À to view the ET graph for the
last two weeks.
Note: In the Automatic Control Mode, when weather
signals are missed the ET Manager will automatically
calculate ET for the missed signals. If weather signals
are not received for more than a day then the ET
Manager will calculate ET based on weather data from
the last 7 days. If there is no weather signal received
for more than a week, the mode automatically uses the
pre-programmed Historical ET values. Even though sig-
nals are missed, the ET Manager will continue to oper-
ate. When this occurs, the ET Manager will report the
last hour of ET as 0.00".
Note: In the Historical Control Mode, the ET Manager
will report the last hour of ET as 0.00".
Information Log
The Information Log menu helps you know what
events have occurred. Watering over the season is
recorded, weather interrupts, and signal status can help
you monitor the activity of your ET Manager. The
Information Log includes:
A Irrigation Log
B Irrigation Log
Last Interrupt
Weather Signal
Page view 32
1 ... 32 33 34 ... 80

Comments to this Manuals

No comments