AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual download pdf (Page 53)

Upgrading the Firmware

AXB-PT10/15/30 PosiTrack Camera Controllers

Upgrading the Firmware

Upgrading the Firmware Using NetLinx Studio

Upgrading Firmware on Axcess Systems

1. Choose Tools > Firmware > Download to Axcess Device to open the Axcess Firmware

Download dialog.

2. Adjust the Comm Settings, if necessary:

a. Click Settings to open the Communication Setting dialog and set the properties for the

desired platform.

b. Select the Communications Port and Baud Rate (FIG. 26).

c. Click OK to accept the changes and return to the Axcess Firmware Download dialog.

3. Click Browse to navigate to the directory containing the firmware files. Once a directory

containing one or more .TSK files is specified, a list of available .TSK files is displayed in the

upper table in this dialog.

4. Click Query Online Devices to populate the on-line device list.

5. Select the desired .TSK file from the list of available files.

6. Select the target AXlink device from the list of online devices in the lower-left table.

7. Click Download to open the Confirm Communication Settings dialog, where you can review

and confirm your Comm Settings and Target Device information before the download begins.

 Click Cancel to return to the Select Axcess Firmware File dialog, to edit these settings

(if necessary).

The NetLinx Studio application can perform firmware upgrades for both Axcess and

NetLinx devices using the options in the NetLinx Studio Firmware sub-menu.

The default Baud Rate for Axcess is 38400 baud and for NetLinx is 38400 baud.

FIG. 26 Setting Comm Settings and Baud Rates

1 ... 52 53 54 55 56

No comments

AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual Page 53