AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual download pdf (Page 49)

Programming

AXB-PT10/15/30 PosiTrack Camera Controllers

RS-232 Commands (Cont.)

CTSPSH

Enables pushes,

releases, and status

information on channel

255 for CTS hardware

handshake input.

Syntax:

"’CTSPSH’"

If CTS is high, channel 255 is On.

Example:

SEND_COMMAND CAM,"’CTSPSH’"

HSOFF

Disables hardware

handshaking (default).

Syntax:

"’HSOFF’"

Example:

SEND_COMMAND CAM,"’HSOFF’"

HSON

Enables hardware

handshaking.

Syntax:

"’HSON’"

Example:

SEND_COMMAND CAM,"’HSON’"

RXCLR

Clears characters

waiting in the receive

buffer pending

transmission to the

Central Controller.

Syntax:

"’RXCLR’"

Example:

SEND_COMMAND CAM,"’RXCLR’"

RXOFF

Disables the device

from passing received

characters to the

Central Controller

(default).

Syntax:

"’RXOFF’"

Example:

SEND_COMMAND CAM,"’RXOFF’"

RXON

Enables the device to

send incoming

(received) characters

to the Central Control-

ler.

Syntax:

"’RXON’"

This command is automatically sent by the master when a 'CREATE_BUFFER'

program instruction is executed.

Example:

SEND_COMMAND CAM,"’RXON’"

TXCLR

Clears characters

waiting in the transmit-

out buffer, and stop

transmissions.

Syntax:

"’TXCLR’"

Example:

SEND_COMMAND CAM,"’TXCLR’"

XOFF

Disables software

handshaking (default).

Syntax:

"’XOFF’"

Example:

SEND_COMMAND CAM,"’XOFF’"

XON

Enables software

handshaking.

Syntax:

"’XON’"

Example:

SEND_COMMAND CAM,"’XON’"

1 ... 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments

AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual Page 49

Comments to this Manuals

Related products and manuals for Bridge cameras AMX AXB-PT15 POSITRACK CAMERA CONTROLLER