AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual download pdf (Page 46)

Programming

AXB-PT10/15/30 PosiTrack Camera Controllers

If there are any errors found, the 230 error value displays that there is an error, and is then followed

by another number to indicate the precise problem. For example, a problem with the Pan Encoder

will return the message:

230, 240.

Preset parameters and commands

The following table lists the preset parameters.

Error Values and Descriptions

Error Description

230 Shows there is an error on the system. This value always appears in conjunction with another

number. It acts as a precursor to any other error messages, as an announcement that an error has

been found and the following values are the errors found.

240 Shows that there is a problem with the Pan Encoder on the PosiTrack. The encoder is a device that

counts the revolutions of the pan motor.

241 Shows that there is a problem with the Tilt Encoder on the PosiTrack. The encoder is a device that

counts the revolutions of the tilt motor.

242 Shows that there is a problem with the Pan Optical reader on the PosiTrack. The reader is a device

that detects the home position of the pan gear.

243 Shows that there is a problem with the Tilt Optical reader on the PosiTrack. The reader is a device

that detects the home position of the tilt gear.

244 Shows that there is a Worm Eccentric error (pan) on the system. This error occurs when the worm

gear is not fitting properly along the pan’s gears.

245 Shows that there is a Worm Eccentric error (tilt) on the system. This error occurs when the worm

gear is not fitting properly along the tilt’s gears.

246 Shows that the pan stalled. Occurs when the pan motor locks up for more than 5 seconds.

247 Shows that the tilt stalled. Occurs when the tilt motor locks up for more than 5 seconds.

Preset Parameters

Preset 1-255

TIME: (Optional) If specified, 0 to 255 in tenth seconds. If not specified, at current rate. Used for voltage

outputs. Used only for Recall Preset.

SPEED: (Optional) 0 to 127. 0 is slowest and 127 if fastest. If not specified, at current speed. Used only for

Recall Preset.

1 ... 45 46 47 ... 56

No comments

AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual Page 46