AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual download pdf (Page 20)

Installation

AXB-PT10/15/30 PosiTrack Camera Controllers

Each PosiTrack unit can be mounted to camera mounts such as the TM-CAM, WM-CAM, and

PM-CAM as shown in FIG. 13.

PT10 and PT15 Camera/Lens Mounting and Balancing

The camera/lens assembly should be mounted so the tilt axis is capable of going through the optical

axis of the camera, assuming the optical centerline is between 1/2" (12.70 mm) and 5" (127.00 mm)

above the mounting plane of the camera lens. The mounting platform (camera cradle) allows the

camera/lens to be mounted with its center of gravity on the tilt axis. The maximum weight of the

camera/lens assemblies on the PT10 is 10 lbs. (4.54 kg) and on the PT15 is 15 lbs. (6.80 kg). The

camera cradle is mounted to the Tilt Hub (FIG. 14).

FIG. 12 Tilt Hub (Mounting plate) dimensions

FIG. 13 Pedestal mount

3.45"

(87.7mm)

Camera points this way when the pan drive is in

the center of its range of motion (Home position)

Position marker

(on the outer surface)

Ø 3.453"

87.7 mm

3.00 BHC"

76.20 mm

Cradle support bracket

Wire

tie-mount

Camera mount assembly

PM-CAM (Pedestal mount

)

The camera/lens cradle can be mounted on either side of the cradle support bracket.

1 ... 19 20 21 ... 56

No comments

AMX AXB-PT15 POSITRACK CAMERA CONTROLLER Instruction Manual Page 20