AMX NetLinx NXB-KNX Instruction Manual download pdf (Page 60)

Appendix A: Telnet Commands

NXB-KNX KNX Communications Gateway

Terminal Commands (Cont.)

Command Description

SET TIME

Sets the current time.

Example:

>SET TIME

Enter Date: (hh:mm:ss) ->

Note: Due to the absence of a battery-backed real-time clock, setting the current time is

only valid for the life of the current run. When the unit is rebooted, the time will be lost.

SHOW LOG

Displays the log of messages stored in the NXB-KNX's memory.

The NXB-KNX logs all internal messages and keeps the most recent messages.

The log contains:·

• Entries starting with first specified or most recent

• Date, Day, and Time message was logged

• Which object originated the message

• The text of the message:

SHOW LOG [start] [end]

SHOW LOG ALL

- <start> specifies message to begin the display.

- If start is not entered, the most recent message will be first.

- If end is not entered, the last 20 messages will be shown.

- If <ALL> is entered, all stored messages will be shown, starting with the most recent.

Example:

>SHOW LOG

Message Log for System 50 Version: v2.10.75

Entry Date/Time Object

Text

-----------------------------------------------------------------

1: 11-01-2001 THU 14:14:49 ConnectionManager

Memory Available = 11436804 <26572>

2: 11-01-2001 THU 14:12:14 ConnectionManager

Memory Available = 11463376 <65544>

3: 11-01-2001 THU 14:10:21 ConnectionManager

Memory Available = 11528920 <11512>

4: 11-01-2001 THU 14:10:21 TelnetSvr

Accepted Telnet connection:socket=14 addr=192.168.16.110 port=2979

5: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OnLine 10002:1:50

6: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OnLine 128:1:50

7: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OffLine 128:1:50

8: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OnLine 96:1:50

9: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OffLine 96:1:50

10: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OnLine 128:1:50

11: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OnLine 96:1:50

12: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OnLine 5001:16:50

13: 11-01-2001 THU 14:05:51 Interpreter

CIpEvent::OnLine 5001:15:50

14: 11-01-2001 THU 14:05:51 Interpreter

SHOW HEAP

Displays heap usage statistics.

SHOW MEM

Displays the memory usage for all memory types.

TIME

Displays the current time on the NXB-KNX.

Example:

>TIME

13:42:04

1 ... 59 60 61 62 63 64

Comments to this Manuals

No comments

AMX NetLinx NXB-KNX Instruction Manual Page 60

Comments to this Manuals

Related products and manuals for Networking AMX NetLinx NXB-KNX