AMX NetLinx NXB-KNX Instruction Manual download pdf (Page 13)

Configuration

NXB-KNX KNX Communications Gateway

Admin Menu

There are several configuration pages included in the Configuration Manager, all of which are accessed via the Admin

drop-down menu (FIG. 9):

Click on an option in this menu to access each of the configuration pages, as described in the following

sub-sections:

Device Configuration

Select Device Configuration from the Admin menu to open the Device Configuration page. Use the options on the page

to specify a Device Number and define connection information for the NetLinx Master.

This page contains two tabs: Device Configuration, and Master Connection.

Device Configuration tab

The initial view of this page is the Device Configuration tab (FIG. 10):

The current device number assigned to this NXB-KNX unit is displayed in the Device Number field.

The version of the device Application currently loaded on this unit is displayed under Current Application Information.

Changing the Device Number

FIG. 9 NXB-KNX Configuration Manager -Admin menu

If you see the additional entries: Application Upgrade and Firmware Upgrade in

the Admin menu, it is an indication that your NXB-KNX is currently using an older

version of the device Application and Firmware.

Refer to the One-Time Upgrade of the NXB-KNX to a Native NetLinx Device on

page 45 for instructions on upgrading your NXB-KNX to the latest NetLinx Firmware.

Once the unit has been upgraded to the current version of NetLinx Firmware, the

Admin Menu will appear as it is shown in FIG. 9.

FIG. 10 Device Configuration page - Device Configuration tab

The currently installed application

version is displayed here

1 ... 12 13 14 ... 64

No comments

AMX NetLinx NXB-KNX Instruction Manual Page 13