AMX NetLinx NXB-KNX Instruction Manual download pdf (Page 17)

Configuration

NXB-KNX KNX Communications Gateway

Select Port Settings from the Admin drop-down menu to open the Port Settings page (FIG. 15). Use the options on the

page to specify various Port settings for this NXB-KNX unit.

The options on this page provide inputs for enabling and disabling of HTTP, HTTPS, Telnet, SSH and FTP ports, and

allow you to change each port number from its standard default assignment.

Clock Manager

Hover the cursor over the Clock Manager option in the Admin menu to open the Clock Manager sub-menu (FIG. 16).

FIG. 15 Port Settings page

Restore Factory Defaults: Click to restore all Port settings to the factory defaults.

HTTP Port Number: • Default = enabled

• Default port number = 80

HTTPS Port Number: • Default = enabled

• Default port number = 443

Telnet Port Number: • Default = enabled

• Default port number = 23

SSH Port Number: • Default = enabled

• Default port number = 22

FTP Port Number: • Default = enabled

• Default port number = 21

Reboot: • Click to initiate a system reboot.

• Port changes only take effect after a reboot.

1 ... 16 17 18 ... 64

No comments

AMX NetLinx NXB-KNX Instruction Manual Page 17