AMX TXC32 Plus User Manual

Teldat Router Frame Relay Doc. DM703-I Rev. 10.00 March, 2003

TELDAT ROUTER - Frame Relay I - 6 Doc.DM703-I Rev.10.00 RouterBRouterDRouterAPhysical ConnectionOrphan Circuit (Configured in thatdirection only)Log

TELDAT ROUTER - Frame Relay I - 7 Doc.DM703-I Rev.10.00 c) Command/Response This is LAPD specific and is not used by this version of Frame Relay.

TELDAT ROUTER - Frame Relay I - 8 Doc.DM703-I Rev.10.00 3. Frame Forwarding over the Frame Relay Network When the Frame Relay protocol receives a pa

TELDAT ROUTER - Frame Relay I - 9 Doc.DM703-I Rev.10.00 4. Frame Relay Network Management The supplier of the Frame Relay network backbone provides

TELDAT ROUTER - Frame Relay I - 10 Doc.DM703-I Rev.10.00 element and a PVC status information element for each PVC. (The link integrity verificatio

TELDAT ROUTER - Frame Relay I - 11 Doc.DM703-I Rev.10.00 5. Frame Relay Data Rates This section introduces data rates for Frame Relay permanent virt

TELDAT ROUTER - Frame Relay I - 12 Doc.DM703-I Rev.10.00 6. Circuit Congestion Circuit congestion occurs because either the sender is transmitting f

TELDAT ROUTER - Frame Relay I - 13 Doc.DM703-I Rev.10.00 6.3. Congestion Notification and Avoidance When congestion occurs, management is responsibl

TELDAT ROUTER - Frame Relay I - 14 Doc.DM703-I Rev.10.00 7. Frame Relay Interfaces Encryption Data The Teldat Router, in addition to offering all th

TELDAT ROUTER - Frame Relay I - 15 Doc.DM703-I Rev.10.00 8. Backup Facilities over Frame Relay Interfaces The possibility of doing a back up of the

- ii - INDEX Chapter 1 The Frame Relay interface...1 1. Introdu

TELDAT ROUTER - Frame Relay I - 16 Doc.DM703-I Rev.10.00 9. Switched Circuits in Frame Relay The function of Switched Virtual Circuits (SVC) in devi

Chapter 2 Configuring Frame Relay Interfaces

TELDAT ROUTER - Configuring Frame Relay II - 18 Doc.DM703-I Rev.10.00 1. Introduction This chapter describes the Frame Relay configuration commands

TELDAT ROUTER - Configuring Frame Relay II - 19 Doc.DM703-I Rev.10.00 2. Displaying the Frame Relay configuration prompt To access the Frame Relay c

TELDAT ROUTER - Configuring Frame Relay II - 20 Doc.DM703-I Rev.10.00 3. Frame Relay Basic Configuration Procedure This section outlines the minimum

TELDAT ROUTER - Configuring Frame Relay II - 21 Doc.DM703-I Rev.10.00 4. Enabling Frame Relay Management There are three management options under Fr

TELDAT ROUTER - Configuring Frame Relay II - 22 Doc.DM703-I Rev.10.00 5. Frame Relay Configuration Commands This section summarizes and then explain

TELDAT ROUTER - Configuring Frame Relay II - 23 Doc.DM703-I Rev.10.00 5.1. ? (HELP) Lists available commands or lists the command’s options. Syntax:

TELDAT ROUTER - Configuring Frame Relay II - 24 Doc.DM703-I Rev.10.00 5.4. CIR-MONITOR Enables the circuit monitoring feature that enforces the tran

TELDAT ROUTER - Configuring Frame Relay II - 25 Doc.DM703-I Rev.10.00 Example: FR config>LIST HDLC Frame Relay HDLC Configuration Encoding

- iii - b) LIST HDLC ...

TELDAT ROUTER - Configuring Frame Relay II - 26 Doc.DM703-I Rev.10.00 Point to point line Indicates if the interface acting as a point-to-point lin

TELDAT ROUTER - Configuring Frame Relay II - 27 Doc.DM703-I Rev.10.00 Circuit Circuit Circuit CIR Burst Excess Name Number Ty

TELDAT ROUTER - Configuring Frame Relay II - 28 Doc.DM703-I Rev.10.00 Encrypt Indicates whether the Frame Relay data field frame is encrypted or in

TELDAT ROUTER - Configuring Frame Relay II - 29 Doc.DM703-I Rev.10.00 Example: FR config>LIST BACK UP Maximum PVCs allowed = 64 Total PVCs con

TELDAT ROUTER - Configuring Frame Relay II - 30 Doc.DM703-I Rev.10.00 Example: FR config>LIST BIT-DISCARD-PROTOCOL Protocol Name Discard Eligib.

TELDAT ROUTER - Configuring Frame Relay II - 31 Doc.DM703-I Rev.10.00 management mode for your Frame Relay interface. Refer to section 4 “Enabling

TELDAT ROUTER - Configuring Frame Relay II - 32 Doc.DM703-I Rev.10.00 Example: FR config>NO BROADCAST FR config> c) NO CIR-MONITOR Disables

TELDAT ROUTER - Configuring Frame Relay II - 33 Doc.DM703-I Rev.10.00 NOTE. The NUCLEOX-LIKE-BIR option is valid for the following Teldat Routers: N

TELDAT ROUTER - Configuring Frame Relay II - 34 Doc.DM703-I Rev.10.00 Example: FR config>NO SVC Called number []? FR config> 5.11. NUCLEOX-LIK

TELDAT ROUTER - Configuring Frame Relay II - 35 Doc.DM703-I Rev.10.00 5.14. POINT-TO-POINT-LINE The interface acting as a point-to-point line option

- iv - 3.1. ? (HELP) ...

TELDAT ROUTER - Configuring Frame Relay II - 36 Doc.DM703-I Rev.10.00 default creates the virtual circuit encrypt e

TELDAT ROUTER - Configuring Frame Relay II - 37 Doc.DM703-I Rev.10.00 Inverse-arp Permits you to define the Inverse ARP protocol as enabled or disa

TELDAT ROUTER - Configuring Frame Relay II - 38 Doc.DM703-I Rev.10.00 a) SET CALLING-ADDRESS This is the NN value which identifies our Frame Relay

TELDAT ROUTER - Configuring Frame Relay II - 39 Doc.DM703-I Rev.10.00 Example: FR config>SET IDLE FLAG FR config> SET IDLE MARK Example: FR co

TELDAT ROUTER - Configuring Frame Relay II - 40 Doc.DM703-I Rev.10.00 Example: FR config>SET IR-ADJUSTMENT IR adjustment % increment [12]? IR adj

TELDAT ROUTER - Configuring Frame Relay II - 41 Doc.DM703-I Rev.10.00 l) SET N3- PARAMETER Max# Configures the number of monitored management even

TELDAT ROUTER - Configuring Frame Relay II - 42 Doc.DM703-I Rev.10.00 q) SET TRANSMIT DELAY Allows the insertion of a delay between transmitted pa

TELDAT ROUTER - Configuring Frame Relay II - 43 Doc.DM703-I Rev.10.00 Bc The maximum amount of data in bits that the network agrees to deliver duri

TELDAT ROUTER - Configuring Frame Relay II - 44 Doc.DM703-I Rev.10.00 use a name that describes the characteristics of the circuit. The default is

Chapter 3 Monitoring Frame Relay

Chapter 1 The Frame Relay interface

TELDAT ROUTER - Monitoring Frame Relay III - 46 Doc.DM703-I Rev.10.00 1. Introduction This chapter describes the Frame Relay monitoring commands and

TELDAT ROUTER - Monitoring Frame Relay III - 47 Doc.DM703-I Rev.10.00 2. Displaying the Frame Relay monitoring prompt To access Frame Relay monitori

TELDAT ROUTER - Monitoring Frame Relay III - 48 Doc.DM703-I Rev.10.00 3. Frame Relay Monitoring Commands This section summarizes and then explains t

TELDAT ROUTER - Monitoring Frame Relay III - 49 Doc.DM703-I Rev.10.00 3.2. CLEAR Removes all statistics on the Frame Relay interface. Syntax: FR>

TELDAT ROUTER - Monitoring Frame Relay III - 50 Doc.DM703-I Rev.10.00 Example: FR>ENABLE CONGESTION-MONITOR FR> c) ENABLE PVC-BACK-UP-RETURN

TELDAT ROUTER - Monitoring Frame Relay III - 51 Doc.DM703-I Rev.10.00 Frames dropped Indicates the number of transmitted frames that this PVC has d

TELDAT ROUTER - Monitoring Frame Relay III - 52 Doc.DM703-I Rev.10.00 Point to point line Indicates the DLCI through which all the traffic exits wh

TELDAT ROUTER - Monitoring Frame Relay III - 53 Doc.DM703-I Rev.10.00 Total sequence responses Indicates the total number of sequence number respon

TELDAT ROUTER - Monitoring Frame Relay III - 54 Doc.DM703-I Rev.10.00 Circuit Number Indicates the number of the circuit through which the packets

TELDAT ROUTER - Monitoring Frame Relay III - 55 Doc.DM703-I Rev.10.00 Called Number This is the NN called in order to establish the switched circui

TELDAT ROUTER - Frame Relay I - 2 Doc.DM703-I Rev.10.00 1. Introduction This chapter describes the Frame Relay interface software and includes the f

TELDAT ROUTER - Monitoring Frame Relay III - 56 Doc.DM703-I Rev.10.00 Example: FR>SET IR-ADJUSTMENT IR adjustment % increment [12]? IR adjustment

TELDAT ROUTER - Monitoring Frame Relay III - 57 Doc.DM703-I Rev.10.00 a) COMPRESSION RESTART-STATISTICS Restarts the compression statistics counte

TELDAT ROUTER - Monitoring Frame Relay III - 58 Doc.DM703-I Rev.10.00 Example: FR>CRTP Circuit number[16]? List 1, Clear 2 : [1]?1 CRTP Compressi

TELDAT ROUTER - Monitoring Frame Relay III - 59 Doc.DM703-I Rev.10.00 4. Frame Relay Interfaces and the MONITOR procedure DEVICE command You can als

TELDAT ROUTER - Frame Relay I - 3 Doc.DM703-I Rev.10.00 2. Frame Relay Protocol Overview The Frame Relay (FR) protocol is a method of transmitting i

TELDAT ROUTER - Frame Relay I - 4 Doc.DM703-I Rev.10.00 RouterBRouterDRouterADLCI 19Physical Connection Logical ConnectionDLCI 16DLCI 17DLCI 18Frame

TELDAT ROUTER - Frame Relay I - 5 Doc.DM703-I Rev.10.00 RouterBDLCI 19BRouterDRouterAPhysical ConnectionLogical ConnectionFrameRelayBackbone Figur