AMX DXLink Multi-Format Wallplate Instruction Manual Page 31
- Page / 141
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Product Overview and Specifications
31
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
* For more details and helpful cabling information, reference the white paper titled “Cabling for Success with DXLink”
available at www.amx.com or contact your AMX representative.
** “Common building” is defined as: Where the walls of the structure(s) are physically connected and the structure(s)
share a single ground reference.
AMX reserves the right to modify its products and their specifications without notice.
General Specifications (continued)
Parameter Value
Thermal Dissipation,
Enova DXLink Power Supplied (max.)
Multi-Format TX 34 BTU/hr., HDMI TX 31 BTU/hr., Wallplate TX 24 BTU/hr.,
Decor Wallplate TX 24 BTU/hr., HDMI RX 51 BTU/hr.
Power Connector (Modules Only) 2.1 mm DC power jack
Operational Temperature 32° F to 104° F (0° C to 40° C)
Storage Temperature -22° F to 158° F (-30° C to 70° C)
Operational Humidity 5 to 85% RH (non-condensing)
Storage Humidity 0 to 90% RH (non-condensing)
Module - Dimensions
Depth
Width
Height
5.15 in. (13.08 cm)
8.71 in. (22.12 cm)
1.00 in. (2.54 cm)
Module - Weight Approximately 1.1 lb. (0.50 kg)
Module - Shipping Weight Approximately 2.2 lb. (1.00 kg)
Modules - Mounting Options Compatible with all V Style versatile mounting options including rack, surface, or
pole (for V Style Mounting kits, see www.amx.com)
Wallplate TX - Dimensions
Depth
Width
Height
1.31 in. (3.33 cm)
5.98 in. (15.20 cm)
4.69 in. (11.90 cm)
Wallplate TX - Weight Approximately 1.4 lb. (0.64 kg)
Wallplate TX - Shipping Weight Approximately 2.0 lb. (0.91 kg)
Wallplate TX - Mounting Options Wallplate TX mounts onto standard double-gang US, UK, or EU back boxes
Decor Wallplate TX -Dimensions
Depth
Width
Height
2.25 in. (5.72 cm)
3.48 in. (8.84 cm)
4.06 in. (10.31 cm)
Decor Wallplate TX - Weight Approximately 0.75 lb. (0.34 kg)
Decor Wallplate TX - Shipping Weight Approximately 1.35 lb. (0.61 kg)
Decor Wallplate TX - Mounting Decor Wallplate TX mounts in standard double-gang US back box
MTBF 381,000 hours
Transport Layer Throughput 10.2 Gbps
Twisted Pair Cable Type
Shielded Cat6, Cat6A, Cat7*
Twisted Pair Cable Length Up to 328 ft. (100 m)*
Important: DXLink twisted pair cable runs for DXLink equipment shall only be
run within a common building.**
Modules - Airflow Convection (openings on top of case)
Transmitters and Receiver
Inter-compatibility
All DXLink Transmitters can connect directly to the DXLink HDMI RX. The
Wallplate TX and Decor Wallplate TX require either PDXL-2 (FG1090-170) or
PS-POE-AT-TC (FG423-84) to do so.
Spec - Twisted Pair Cable
Length
- Twisted Pair 1
- Transmitters/Receiver 1
- Contents 3
- ESD Warning 6
- Copyright Notice 9
- Liability Notice 9
- US FCC Notice 9
- Lithium Batteries Notice 9
- Trademark Notices 9
- Warnings and Cautions 10
- Applicability Notice 11
- Product Notes 11
- Product Compatibility Tables 12
- Multi-Format TX front view 14
- HDMI TX front view 14
- Multi-Format TX rear view 18
- HDMI TX rear view 19
- Receiver 22
- HDMI RX front view 22
- HDMI RX rear view 23
- Common Features/Functionality 25
- USB Port (Rear) 26
- Shielded Cat6, Cat6A, Cat7* 31
- qualified): 1 per module 32
- Audio Format 33
- Local Audio 35
- Specifications 35
- Installation and Setup 36
- Setup Information 37
- Custom EDID Settings 38
- Example B 40
- Example C 40
- Example D 40
- Example A 40
- Power Budget Calculation 42
- Avoid network loops 43
- #1 Toggle Settings 44
- Installation Options 44
- #2 Toggle Settings 44
- #3 Toggle Settings 45
- V Style mounting hardware 46
- DXLink LEDs 51
- Audio Type Precedence 52
- Control Cables 55
- HDMI RX – Applying Power 58
- IR Receiver cable (FG-IR03) 60
- ID Pushbutton Functions 61
- Network Configuration 64
- TCP/IP Address Configuration 65
- Factory Default Parameters 66
- Device IDs 67
- Using the ID Pushbutton 67
- Factory Parameters* 69
- IRL File Transfers 72
- Transferring IRL Files 75
- Additional Documentation 77
- Overview 78
- Device Numbering and Ports 78
- Aspect Ratio Options 82
- VIDIN_PREF_EDID 85
- IR CHANNELs 88
- IR SEND_COMMANDs 88
- GET MODE 89
- SET MODE (IR command) 90
- USB SEND-COMMANDs (Receiver) 94
- FACTORYAV command 96
- SET TELNET PORT 97
- Troubleshooting 99
- Power Issues 100
- DXLink Connection Issues 101
- Network Setup Issues 102
- Technical Support 102
- Extender System (Standalone) 103
- Important Upgrade Information 105
- Firmware Versions 106
- Transferring KIT Files 107
- Telnet Username and Password 109
- Telnet Commands (continued) 111
- Master Connection Modes 116
- Windows Client Programs 117
- Linux Telnet Client 117
- Creating a Virtual Master 120
- Click to open the 120
- Communication Settings 120
- CONNECTION and press Enter 122
- HD-15 Connector Cable Pinout 124
- DVI Connector Pinout 125
- CEA (RGB Color Space): 130
- CVR (RGB Color Space): 131
- CVT (RGB Color Space): 132
- DMR (RGB Color Space): 133
- DMT (RGB Color Space): 133
- Applicability 134
- Remove jackscrew and washer 135
- Appendix H – EDID Programming 136
- DXLink Connection to PC 137
- EDID Programmer View 138
- Read Error Message 139
- 01/07/14 141
Related products and manuals for Receiver AMX DXLink Multi-Format Wallplate
Receiver AMX UDM-0102 User Manual
(3 pages)
(3 pages)
Receiver AMX UDM-0102 User Manual
(2 pages)
(2 pages)
Receiver AMX MX8 Instruction Manual
(22 pages)
(22 pages)
Receiver AMX DXLink HDMI User Manual
(6 pages)
(6 pages)
Receiver AMX MX16 User Manual
(2 pages)
(2 pages)
Receiver AMX MX8 User Manual
(2 pages)
(2 pages)
(6 pages)© 2020, manymanuals.com. All rights reserved. | 0.911 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals