AMX DXLink Multi-Format Wallplate Instruction Manual Page 12
- Page / 141
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Product Overview and Specifications
12
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Both the video and audio are transported over twisted pair cable to an Enova DGX Digital Media Switcher, an
applicable Enova DVX Solution, or directly to an HDMI RX. Direct connection requires either PDXL-2
(FG1090-170) or PS-POE-AT-TC (FG423-84).
HDMI RX
– The HDMI RX receives an HDMI signal with embedded audio over twisted pair cable from a
DXLink compatible device (or from a DXLink Transmitter) and sends the signal on to the destination. Audio
received on the HDMI RX can also be output on the Stereo Audio Out port if it originated as a 2 channel audio
signal. The 232 port (RS-232) on the HDMI RX supports bidirectional serial data via the twisted pair cable
to/from the 232 port on the Multi-Format TX or HDMI TX. The HDMI RX features SmartScale
®
Technology
(integrated EDID output scaling) to ensure an appropriate output resolution, plus it supports a Manual (override)
option for setting up custom resolutions and a Bypass option. The HDMI RX also has IR ports.
Note: If a DVI-D signal is used (via a DVI-to-HDMI cable adapter), the advanced audio support from HDMI
will not be available.
Note: These DXLink products support several different modes which are available for system setup and use.
Brief explanations of the modes are provided in the section “Quick Reference Tables for Modes” on page 28
along with page references to complete information.
Product Compatibility Tables
The Transmitters and the Receiver are compatible with the DXLink products listed in the two tables below.
Enova DGX Solutions and DXLink Functions
The following table shows which Enova DGX products support specific DXLink functions.
* Inputs and outputs up to 8, 16, or 32 depending on the system (in increments of 4 inputs or outputs per board).
** For power budget information for system planning when using DXLink Transmitters and Receivers with an
Enova DGX Digital Media Switcher, see page 41.
Enova DVX Solutions and DXLink Functions
The following table shows which Enova DVX products support specific DXLink functions.
* Does not apply to the DVX-2100HD.
DXLink Functions in Enova DGX Solutions
DXLink Twisted Pair Input Boards DXLink Twisted Pair Output Boards
DXLink Inputs Up to 8/16/32* –
Power on DXLink Inputs** Yes –
DXLink Outputs – Up to 8/16/32*
Power on DXLink Outputs** –Yes
DXLink Functions in Enova DVX Solutions*
DVX-3156HD DVX-3155HD DVX-3150HD DVX-2155HD DVX-2150HD
DXLink Inputs 42020
Power on DXLink Inputs Yes Yes NA Yes NA
DXLink Outputs 22211
Power on DXLink Outputs No No No Yes Yes
- Twisted Pair 1
- Transmitters/Receiver 1
- Contents 3
- ESD Warning 6
- Copyright Notice 9
- Liability Notice 9
- US FCC Notice 9
- Lithium Batteries Notice 9
- Trademark Notices 9
- Warnings and Cautions 10
- Applicability Notice 11
- Product Notes 11
- Product Compatibility Tables 12
- Multi-Format TX front view 14
- HDMI TX front view 14
- Multi-Format TX rear view 18
- HDMI TX rear view 19
- Receiver 22
- HDMI RX front view 22
- HDMI RX rear view 23
- Common Features/Functionality 25
- USB Port (Rear) 26
- Shielded Cat6, Cat6A, Cat7* 31
- qualified): 1 per module 32
- Audio Format 33
- Local Audio 35
- Specifications 35
- Installation and Setup 36
- Setup Information 37
- Custom EDID Settings 38
- Example B 40
- Example C 40
- Example D 40
- Example A 40
- Power Budget Calculation 42
- Avoid network loops 43
- #1 Toggle Settings 44
- Installation Options 44
- #2 Toggle Settings 44
- #3 Toggle Settings 45
- V Style mounting hardware 46
- DXLink LEDs 51
- Audio Type Precedence 52
- Control Cables 55
- HDMI RX – Applying Power 58
- IR Receiver cable (FG-IR03) 60
- ID Pushbutton Functions 61
- Network Configuration 64
- TCP/IP Address Configuration 65
- Factory Default Parameters 66
- Device IDs 67
- Using the ID Pushbutton 67
- Factory Parameters* 69
- IRL File Transfers 72
- Transferring IRL Files 75
- Additional Documentation 77
- Overview 78
- Device Numbering and Ports 78
- Aspect Ratio Options 82
- VIDIN_PREF_EDID 85
- IR CHANNELs 88
- IR SEND_COMMANDs 88
- GET MODE 89
- SET MODE (IR command) 90
- USB SEND-COMMANDs (Receiver) 94
- FACTORYAV command 96
- SET TELNET PORT 97
- Troubleshooting 99
- Power Issues 100
- DXLink Connection Issues 101
- Network Setup Issues 102
- Technical Support 102
- Extender System (Standalone) 103
- Important Upgrade Information 105
- Firmware Versions 106
- Transferring KIT Files 107
- Telnet Username and Password 109
- Telnet Commands (continued) 111
- Master Connection Modes 116
- Windows Client Programs 117
- Linux Telnet Client 117
- Creating a Virtual Master 120
- Click to open the 120
- Communication Settings 120
- CONNECTION and press Enter 122
- HD-15 Connector Cable Pinout 124
- DVI Connector Pinout 125
- CEA (RGB Color Space): 130
- CVR (RGB Color Space): 131
- CVT (RGB Color Space): 132
- DMR (RGB Color Space): 133
- DMT (RGB Color Space): 133
- Applicability 134
- Remove jackscrew and washer 135
- Appendix H – EDID Programming 136
- DXLink Connection to PC 137
- EDID Programmer View 138
- Read Error Message 139
- 01/07/14 141
Related products and manuals for Receiver AMX DXLink Multi-Format Wallplate
Receiver AMX UDM-0102 User Manual
(3 pages)
(3 pages)
Receiver AMX UDM-0102 User Manual
(2 pages)
(2 pages)
Receiver AMX MX8 Instruction Manual
(22 pages)
(22 pages)
Receiver AMX DXLink HDMI User Manual
(6 pages)
(6 pages)
Receiver AMX MX16 User Manual
(2 pages)
(2 pages)
Receiver AMX MX8 User Manual
(2 pages)
(2 pages)
(6 pages)© 2020, manymanuals.com. All rights reserved. | 0.901 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals