AMX AXD-CP Specifications download pdf (Page 37)

AMX Novara DCS1000 Device Configuration Software

Novara ControlPads & KeyPads

Overview

Novara ControlPads and KeyPads are configured using the AMX Novara DCS1000 software application, available for

download from www.amx.com (FIG. 44).

The AMX Novara DCS1000 application allows the ControlPad to perform various functions such as RS232/IR control /

Button Feedback /Delay Time / Relay Control / Time Out if a button press is not detected after a certain time period.

Each button is configured individually; it can be made to execute on a Press or Release.

Each button can be configured to Toggle for up to 4 Presses or it could be assigned to a Bank of buttons

having the same function but controlling different equipment.

A Script is written for each button containing events. A script can be written for events to execute when the

ControlPad is powered up by selecting ‘Start Up’ from the system window.

An Event could be a button Feedback, a Delay Time etc.

When any or all of the buttons have been configured, the information can be downloaded to the ControlPad.

Downloading the Program to the ControlPad

1. Connect the USB Programming Cable to a USB port on your PC, and to the Program (USB) port on the

ControlPad.

2. Click on the Program menu bar item. This invokes the Download Program window (FIG. 45).

3. Click the Program button to download the program to the ControlPad.

FIG. 44 AMX Novara DCS1000 software application (initial view)

FIG. 45 Download Program window

Command Bar

System window

Menu Bar

Script window

1 ... 36 37 38 ... 70

No comments

AMX AXD-CP Specifications Page 37