AMX AXD-CP Specifications download pdf (Page 15)

Novara ControlPads

Novara ControlPads & KeyPads

RS232 Out Connector

FIG. 9 illustrates connecting a 1000 Series ControlPad to RS232-controlled devices:

IR Out Connector

FIG. 10 illustrates connecting the IR transmitter heads to a 1000 Series ControlPad for IR-controlled devices:

FIG. 9 RS232 Out Connector

RS232 Device

GND

Signal

SHARED 12V

Novara ControlPads support one-way RS-232 control (RS-232 TX signals to the

third-party device, not RS-232 RX signals from the controlled device).

If using the CC-NIRC IR emitter with 2-pin phoenix connector (not included), be

aware that the IR Emitter polarities on Novara ControlPads are opposite to that of

other AMX equipment. This is not an issue if using the included 10-pin connector.

FIG. 10 IR OUT Connector

IR Transmitter

GND

Signal

SHARED 12V

The IR Transmitter must be placed directly in front of the controlled device’s IR

window.

1 ... 14 15 16 ... 70

No comments

AMX AXD-CP Specifications Page 15