Novara AxLink KeyPads
20
Novara ControlPads & KeyPads
Wiring and Connections
ControlPads - Rear Panel Connectors
FIG. 21 shows the rear panel connectors of the Novara AxLink KeyPads, and indicates a typical installation:
Power Supply Connector
Novara AxLink KeyPads can be powered by the AxLink bus. Optionally, an external 12V power supply can be used
(FIG. 22).
Connect the White strip lead to the +VE terminal on the ControlPad
Connect the Black strip lead to the –VE terminal
FIG. 21 Novara AxLink KeyPads - Rear Panel Connectors
The rear panel connector layout is identical for all Novara AxLink KeyPads.
FIG. 22 Power Supply Connector
Alternate Button
Numbering DIP Switch
AxLink Device
Address DIP
AxLink Status LED
NetLinx Master
(AxLink port)
Switch
If using an external Power Supply, be aware that the Power Supply polarities on
Novara KeyPads are opposite to that of other AMX equipment.
Comments to this Manuals