AMX AXD-CP Specifications download pdf (Page 16)

Novara ControlPads

Novara ControlPads & KeyPads

Input Connector

FIG. 11 illustrates connecting the 1000 Series ControlPad to an external switch (such as a PIR switch), for detecting a

High to Low or Low to High state.

If for example a PIR is attached to the Input, this will act as a trigger to reset the internal inactivity timer for Time Out

routines.

Power Supply Connector

FIG. 12 illustrates connecting the 1000 Series ControlPad to the included power supply.

Connect the White strip lead to the +VE terminal on the ControlPad,

Connect the Black strip lead to the –VE terminal.

When the ControlPad is powered up or a program downloaded, button #2 will flash for 2 seconds then extinguish to

indicate that the ControlPad has passed it’s self-test.

FIG. 11 Input Connector

PIR Switch

GND

Input State

SHARED 12V

If using an AMX Power Supply with a 2-pin phoenix connector (not included), be

aware that the Power Supply polarities on Novara ControlPads are opposite to that of

other AMX equipment. This is not issue if using the included 10-pin connector.

FIG. 12 Power Supply Connector

Power Supply

SHARED 12V

1 ... 15 16 17 ... 70

No comments

AMX AXD-CP Specifications Page 16