AMX NI-2000 Instruction Manual download pdf (Page 96)

NetLinx Security and Web Server

NetLinx Integrated Controllers

18. The first tab displayed within your open browser window is WebControl.

Using your NetLinx Master to control the G4 panel

Refer to the specific panel instruction manual for detailed information on configuring and enabling

WebControl.

Once the Master’s IP Address has been set through NetLinx Studio (version 2.2 or higher):

1. Launch your web browser.

2. Enter the IP Address of the target NetLinx Master (example: 198.198.99.99) into your web

browser’s Address field.

3. Enter a valid user name and password into the fields within the Enter Network Password

dialog.

4. Click OK to enter the information and proceed to the Master’s WebControl tab.

5. Press the Enter key on your keyboard to begin the communication process between the target

Master and your PC.

6. This tab (FIG. 35) displays links to both G3 web panel pages downloaded to the target Master

and G4 panels running the latest G4 Web Control feature.

7. Click on the G4 panel name link associated with the target panel. A secondary web browser

window appears on the screen (FIG. 60).

In order to fully utilize the SSL encryption, your web browser should incorporate an encryption

feature. This encryption level is displayed as a Cipher strength.

If a Security Alert window appears on your computer screen, refer to the specific NetLinx Master

Instruction Manual for detailed information regarding this popup window. These steps are based on

a Master with proper security and SSL encryption enabled.

FIG. 59 WebControl Tab (populated with panels)

Compatible

devices field

Communication

compression

options

G3 panel

G4 panel

Application

tabs

1 ... 95 96 97 ... 134

No comments

AMX NI-2000 Instruction Manual Page 96