AMX NI-2000 Instruction Manual Page 57
- Page / 134
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Configuration and Firmware Update
51
NetLinx Integrated Controllers
10. Right-click the System number and select Refresh System. This establishes a new connection
to the System and populates the list with the current devices (and their firmware versions) on
your system.
Upgrading the Control Card Firmware via an IP
Before beginning with this section, verify the Integrated Controller’s on-board Master has been
updated with the latest firmware and that the NetLinx cards are securely inserted into the NI-4000
(refer to the Installing NetLinx Control Cards (NI-4000 Only) section on page 29).
1. Repeat the communication setup procedures outlined within the Upgrading the NI Controller
Firmware via an IP section on page 48.
2. Click on the OnLine Tree tab in the Workspace window to view the devices on the System.
The default System value is one (1).
3. Right-click on the Empty Device Tree/System entry and select Refresh System to establish a
new connection to the System’s Master and refresh the list with online system devices.
4. After the Communication Verification dialog window verifies active communication between
the PC and the Master, verify the NetLinx Control Cards appear in the OnLine Tree tab of the
Workspace window.
5. Verify you have downloaded the latest NetLinx Control Card firmware (KIT) file to a known
location.
6. Select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu to open
the Send to NetLinx Device dialog (FIG. 34). Verify the target’s Device and System numbers
matches the value listed within the System folder in the Workspace window.
7. Select the Control Card’s KIT file from the Files section (FIG. 34).
8. Enter the System number associated with the desired Master (listed in the Workspace window).
9. Enter the Device number of the target NetLinx Control Card.
10. Click the Reboot Device checkbox to reboot the on-board Master after the firmware update to
the NetLinx Control Card is complete.
11. Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of
the dialog (FIG. 33).
12. Click Close once the download process is complete.
If the control card firmware is not up to date; download the latest firmware file from
www.amx.com > Tech Center > Downloadable Files > Firmware Files >
NXC-XXX.
In this example, the NXC-VOL card contains out-of-date firmware and requires build
1.00.09.
- NetLinx Integrated 1
- Controllers 1
- (http://www.openssl.org/) 2
- Table of Contents 3
- Introduction 7
- NI-2000 Specifications 8
- NI-3000 Specifications 11
- NI-4000 Specifications 16
- Installation Procedures 21
- Connections and Wiring 23
- Wiring Guidelines 24
- ICSNet RJ-45 Signals 28
- Relay Connections and Wiring 30
- ETHERNET 30
- IR / SERIAL (Ports 5-8) 32
- IR / SERIAL (Ports 9-16) 32
- 8 76 45 321 32
- Installation and Upgrading 35
- Device:Port:System (D:P:S) 36
- Compact Flash Upgrades 37
- Setting the System Value 44
- NXC-XXX 57
- 1.00.09 57
- NetLinx Security Terms 60
- WebControl Tab 61
- Security Tab 63
- Security Tab Features (Cont.) 64
- Security System Features 64
- Security tab - Add Group page 65
- Add Group Entries 65
- Add Group Entries (Cont.) 66
- Modify Group Entries 66
- Security tab - Add User page 69
- Add User Entries 69
- Modify User Entries 70
- (ex: bit length, city, etc.) 74
- System Tab 76
- Show Devices Tab 76
- Network Tab 76
- Devices or Network) 86
- SSL Certificate Procedures 87
- NetLinx Security Features 99
- <ENTER> 100
- Main Security Menu 110
- Help menu 112
- Help Menu Options 112
- Logging Into a Session 113
- Programming 115
- Program Port Commands 116
- Program Port Commands (Cont.) 117
- ESC Pass Codes 119
- RS232/422/485 Ports Channels 120
- IR / Serial Ports Channels 124
- IR RX Port Channels 124
- IR/Serial Send_Commands 124
- Input/Output Send_Commands 129
- Troubleshooting 131
- SET ETHERNET MODE 10 HALF 132
- SET ETHERNET MODE 10 FULL 132
- SET ETHERNET MODE AUTO 132
- Last Revision: 12/10/04 134
Related products and manuals for Supplementary music equipment AMX NI-2000
(42 pages)© 2020, manymanuals.com. All rights reserved. | 0.905 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals