AMX NI-2000 Instruction Manual download pdf (Page 100)

NetLinx Security with a Terminal Connection

NetLinx Integrated Controllers

4. Enter any text into the Name field of the HyperTerminal Connection Description dialog

window and click OK when done.

5. From the Connect Using field, click the down-arrow and select the COM port being used for

communication by the target Master.

6. Click OK when done.

7. From the Bits per second field, click the down-arrow and select the baud rate being used by the

target Master.

 Configure the remaining communication parameters as follows: Data Bits:8, Parity:None,

Stop bits:1, and Flow control: None (default is Hardware).

 Click OK to complete the communication parameters and open a new Terminal window.

8. Type echo on to view the characters while entering commands.

Accessing the Security configuration options

1. In the Terminal session, type help security to view the available security commands. Here is a

listing of the security help:

---- These commands apply to the Security Manager and Database ----

logout Logout and close secure session

setup security Access the security setup menus

2. Type setup security to access the Main Security Menu, shown below:

>setup security

--- These commands apply to the Security Manager and Database ----

1) Set system security options for NetLinx Master

2) Display system security options for NetLinx Master

3) Add user

4) Edit user

5) Delete user

6) Show the list of authorized users

7) Add group

8) Edit group

9) Delete group

10) Show list of authorized groups

11) Set Telnet Timeout in seconds

12) Display Telnet Timeout in seconds

13) Make changes permanent by saving to flash

Or <ENTER> to return to previous menu

Security Setup ->

3. The Main Security Menu shows a list of choices and a prompt. To select one of the listed

choices, simply enter the number of the choice (1-13) at the prompt and press

<ENTER>.

4. Each option in the Main Security Menu displays a sub-menu specific to that option.

The following section describes using each of the Main Security Menu options.

For a detailed description of each option in the Main Security Menu, refer to Main Security

Menu on page 104.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 133 134

Comments to this Manuals

No comments

AMX NI-2000 Instruction Manual Page 100

Comments to this Manuals

Related products and manuals for Supplementary music equipment AMX NI-2000