AMX Mio Modero Device Family Technical Information download pdf (Page 29)

Programming The Mio Modero

Mio Modero Device Family

SEND_COMMANDs (Cont.)

^FML D L # Sets a line of the display to a dynamic line with a level, and sets the level style

Syntax:

"'^FML-<variable text address range>,D,L,<Level Style>'"

Variables:

variable text address range = 1 - 4; the address range corresponds to the

dynamic line number.

D = Dynamic line type

L = Level

level style = 0 or 1 for level style type

Example:

SEND_COMMAND Panel,"'^FML-1,D,L,0'"

Set line 1 to a Dynamic line with level and set style to 'Level Style 0’

^GLY

(LCD equipped only)

Set Glyph Character.

Syntax:

"'^GLY-<variable text address range>,',<glyph number>"

Variables:

variable text address range = 1 - 4; the address range corresponds to the

dynamic line number.

glyph number = glyph text.

Example:

SEND_COMMAND Panel, "'^GLY-1&4,',2"

Sets the second glyph character on dynamic lines 1 and 4 of the LCD button.

^JST-

(LCD equipped only)

Set text alignment using a numeric keypad layout for those buttons with a

defined address range

Syntax:

"'^JST-<variable text address range>,<new text

alignment>'"

Variable:

variable text address range = 1 - 4; the address range corresponds to the

dynamic line number.

new text alignment = Value of 1 - 9 corresponds to the following locations:

1, 4 or 7 = Left

2, 5 or 8 = Center

3, 6 or 9 = Right

Example:

SEND_COMMAND Panel,"'^JST-1.4,1'"

Sets the text alignment to the left side on dynamic lines 1, 2, 3 and 4 of the

LCD button

Note: There is no vertical alignment.

^PRX- Sets the sensitivity for the proximity sensor.

Syntax:

"'^PRX-#'"

Variables:

# = a value from 0 - 31.

Example:

SEND_COMMAND Panel,"'^PRX-15'"

Sets the proximity sensor for the device to a level of approximately 50%.

1 ... 28 29 30 31 32 33 34

Comments to this Manuals

No comments

AMX Mio Modero Device Family Technical Information Page 29

Comments to this Manuals