AMX Mio Modero Device Family Technical Information download pdf (Page 13)

Installation

Mio Modero Device Family

To change custom buttons:

If connected, disconnect the power supply.

2. If connected to mounting frame, place a flathead screwdriver in the notch at the bottom right of the

Mio Modero, and pry the faceplate from the mounting frame.

3. On the back of the faceplate locate the button access points, outlined with white circles. Using a

straightened paperclip, poke through the button access points until the buttons pop free.

4. Snap the desired custom buttons into place. Be sure to note the orientation of the white insert on the

back of the button, the notch must be down. Insert the bottom of the button first and then push the

top into place.

5. If the power supply was disconnected in Step 1, reconnect and return power to the device.

6. Snap the faceplate on the mounting frame.

Be certain to reprogram the Mio Modero to match the new button arrangement; use KeypadBuilder to

assign the locations. See the KeypadBuilder Instruction Manual available at www.amx.com.

Mio Modero Prestige

The Mio Modero Prestige ships with sheets of common menu items and icons for creating inserts for

single and double buttons.

1. If connected, disconnect the power supply.

2. If connected to mounting frame, place a flathead screwdriver in the notch at the bottom right of the

Mio Modero, and pry the faceplate from the mounting frame.

3. On the back of the faceplate locate the button access points, outlined with white circles. Using a

straightened paperclip, poke through the button access points until the buttons pop free.

4. The Prestige buttons are comprised of three parts, the frame, window, and back insert. From the

front of the button, use your thumb to poke the window and back insert out of the frame. See FIG. 4.

5. Snap the widow into the frame and then place the printed labels inside each

button.

6. Snap the back inset to the window and frame.

7. Insert the buttons into their proper location on the faceplate.

8. If the power supply was disconnected in Step 1, reconnect and return power to the device.

9. Snap the faceplate on the mounting frame.

FIG. 4 Prestige Button Components

Frame

Window

Printed

Label

Back Insert

1 ... 12 13 14 ... 34

No comments

AMX Mio Modero Device Family Technical Information Page 13