AMX Mio Modero Device Family Technical Information download pdf (Page 18)

Installation

Mio Modero Device Family

Wallbox Mounting

Use the cutout dimension for the wallbox to cutout the install surface for the Mio Modero.

2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.

3. If the faceplate is connected to the mounting frame, place a flathead screwdriver in the notch at the

bottom right of the Mio Modero, and pry the faceplate from the mounting frame.

4. Connect the AxLink power supply. The connector passes through the center of the mounting frame

and connects to the board. The connection is illustrated in FIG. 2.

5. Place the mounting frame on the wallbox; align the screw holes with the mounting holes and fasten

the mounting frame to the wallbox using the screws supplied.

6. Attach the faceplate to the mounting frame first at the top and swing it to the bottom. See FIG. 10.

FIG. 9 Mio Modero Double Style mounting dimensions

2.250

[57.2 MM]

[83.4 MM]

3.282

[50.8 MM]

2.000

Do not overtighten the screws when mounting the mounting frame. The device

should be flush with mounting surface.

1 ... 17 18 19 ... 34

No comments

AMX Mio Modero Device Family Technical Information Page 18