AMX Mio Modero Device Family Technical Information download pdf (Page 19)

Installation

Mio Modero Device Family

Podium Mounting

Use the cutout dimension shown in either FIG. 8 or FIG. 9 to cutout the mounting frame install

surface for the Mio Modero.

2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.

3. If the faceplate is connected to the mounting frame, place a flathead screwdriver in the notch at the

bottom right of the Mio Modero, and pry the faceplate from the mounting frame.

4. Connect the AxLink power supply. The connector passes through the center of the mounting frame

and connects to the board. The connection is illustrated in FIG. 2.

5. With the mounting frame resting in the cutout area, drill the mounting holes into the flat surface.

6. Attach the faceplate to the mounting frame first at the top and swing it to the bottom. See FIG. 10

FIG. 10 Attaching the faceplate to the mounting frame

Do not overtighten the screws when mounting the mounting frame. The device

should be flush with mounting surface.

1 ... 18 19 20 ... 34

No comments

AMX Mio Modero Device Family Technical Information Page 19