AMX Mio Modero Device Family Technical Information Page 1

Operation/Reference GuideControl System AccessoriesMio Modero®Device FamilyLast Revised: 09/05/2008

Overview4 Mio Modero Device Family

Installation5 Mio Modero Device FamilyInstallationThe basic front and rear components of the Mio Modero are as follows: Before touching the devic

Installation6 Mio Modero Device FamilyChanging ButtonsThe Mio Modero Classic and Elite are shipped with "installation" buttons; they are int

Installation7 Mio Modero Device FamilyTo change custom buttons:1.If connected, disconnect the power supply.2. If connected to mounting frame, place a

Installation8 Mio Modero Device FamilySetting The AxLink Device Number1. If connected, disconnect the power supply.2. Locate the 8-position Device DIP

Installation9 Mio Modero Device FamilyWiring guidelinesThe Mio Modero requires 12 VDC power to operate properly. The necessary power is supplied via t

Installation10 Mio Modero Device FamilyUsing AxLink for data with an auxiliary power supplyConnect the controller’s AxLink connector to the AxLink con

Installation11 Mio Modero Device FamilyMounting ProceduresFIG. 8 shows the wallbox mounting dimensions for the single and double style Mio Modero. AMX

Installation12 Mio Modero Device FamilyWallbox Mounting1.Use the cutout dimension for the wallbox to cutout the install surface for the Mio Modero.2.

Installation13 Mio Modero Device FamilyPodium Mounting1.Use the cutout dimension shown in either FIG. 8 or FIG. 9 to cutout the mounting frame install

AMX Limited Warranty and DisclaimerAMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years fr

Installation14 Mio Modero Device FamilyAccent FrameWhile the Mio Modero device family does fit into many International wallboxes, it may be necessary

Mio Modero IR15 Mio Modero Device FamilyMio Modero IRThe Mio Modero IR (FIG. 11) is a remote IR receiver for use with NetLinx® Central Controllers and

Mio Modero IR16 Mio Modero Device FamilyWiring and InstallationSet the receive AxLink device number before installing the Mio Modero IR. FIG. 12 illus

Mio Modero IR17 Mio Modero Device FamilyWiring GuidelinesThe Mio Modero IR requires 12 VDC power to operate properly. The power is supplied by the AMX

Mio Modero IR18 Mio Modero Device FamilyMounting ProcedureFIG. 15 shows the wallbox mounting dimensions for the Mio Modero IR. AMX recommends mounting

Mio Modero IR19 Mio Modero Device FamilyFIG. 16 Attaching the faceplate to the mounting frame

Mio Modero IR20 Mio Modero Device Family

Programming The Mio Modero21 Mio Modero Device FamilyProgramming The Mio ModeroKeypadBuilderMost functionality of the Mio Modero is handled using the

Programming The Mio Modero22 Mio Modero Device FamilySEND_COMMANDs (Cont.)^CFG Combine/Uncombine adjacent buttonsSyntax:"'^CFG- <command

Programming The Mio Modero23 Mio Modero Device FamilySEND_COMMANDs (Cont.)^FML D L # Sets a line of the display to a dynamic line with a level, and s

Software License and Warranty AgreementLICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described i

Programming The Mio Modero24 Mio Modero Device FamilySEND_COMMANDs (Cont.)^SHO Show or hide text with a set variable text range.Syntax:"'^SH

Programming The Mio Modero25 Mio Modero Device FamilySEND_COMMANDs (Cont.)^TXT-(LCD equipped only)Assign a text string to those LCD buttons with a def

Programming The Mio Modero26 Mio Modero Device FamilySending Firmware to The Mio Modero KeypadsYou need NetLinx studio to update firmware located on t

Programming The Mio Modero27Mio Modero Device Family

9/08 ©2007 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without n

Table of ContentsiMio Modero Device FamilyTable of ContentsOverview ...

iiMio Modero Device FamilyTable of Contents

Overview1 Mio Modero Device FamilyOverviewThe Mio Modero device family provides a wide range of control capabilities in the form of keypads that are a

Overview2 Mio Modero Device FamilySpecificationsThe Mio Modero device family keypad specifications are as follows: SpecificationsPower: 12 vDC, 70 -

Overview3 Mio Modero Device FamilyAvailable Color SchemesThe Mio Modero device family is available in a range of colors, and the Elite supports a vari