AMX DESIGN XPRESS V 1.5 - PROGRAMMER GUIDE User's Guide download pdf (Page 69)

KwikNet System Configuration

DAK

IPv4 Stack Parameters (continued)

UDP Channel Support

KwikNet offers a simplified UDP service for those not familiar with the use of the UDP

sockets API. The KwikNet UDP service uses a UDP channel, an artificial connection for

sending and receiving UDP datagrams (see Chapter 4.1). If you intend to use KwikNet

UDP channel services, check this box. Otherwise, leave this box unchecked.

DHCP Client Support

KwikNet includes a DHCP Client for using the Dynamic Host Configuration Protocol

(DHCP) to derive an IP address, subnet mask and default gateway for any of your

network interfaces. The DHCP Client also supports the BOOTP protocol. The DHCP

Client is described in Chapter 4.2. The DHCP Client is provided as a standard feature

with systems that only incorporate IPv4. For dual IPv4/IPv6 systems requiring a DHCP

Client, an alternate, optional DHCP component is available.

If any network interface must use DHCP or BOOTP for IP address acquisition, check this

box. Otherwise, leave this box unchecked.

Auto IP Address Discovery

The optional KwikNet Auto IP component can be used to dynamically establish an IP

address for any of your Ethernet network interfaces. If any Ethernet network interface

must use Auto IP for IP address negotiation, check this box. Otherwise, leave this box

unchecked.

RIP v2 Listener

KwikNet supports the Routing Information Protocol (RIP). If you check this box, KwikNet

will listen for RIP packets and add the routing information which they provide to the

KwikNet routing table. If you do not require RIP support, leave this box unchecked.

PING Replies To

Check this box if you wish

KwikNet to respond to an ICMP ping request addressed to a

broadcast or multicast IP address. Check one of the radio buttons to indicate whether

KwikNet should respond to "broadcast and multicast" or to "multicast only". If all ping

requests to a broadcast or multicast IP address are to be ignored, leave this box

unchecked.

IGMP Support

Check this box if you have the optional

KwikNet IGMP component and wish to include it

in the KwikNet Library.

1 ... 68 69 70 ... 316

No comments

AMX DESIGN XPRESS V 1.5 - PROGRAMMER GUIDE User's Guide Page 69