AMX NetLinx Master-Ethernet Card/Module NXC-ME260 Instruction Manual download pdf (Page 8)

Product Information

NXC-ME260 NetLinx Master-Ethernet Card/Module

Modes and front panel LED blink patterns

The following table lists the modes for the Master Cards/Modules and blink patterns for the front

panel LEDs for each mode.

Rear panel LEDs: ICSNet/ICSHub

Modes and LED Blink Patterns

LEDs and Blink Patterns

Mode Description

STATUS

(green)

OUTPUT

(red)

INPUT

(yellow)

OS Start Starting the operating system (OS). On On On

Boot Master is booting. On Off On

Contacting DHCP

server

Master is contacting a DHCP server for IP

configuration information.

On Off Fast Blink

Unknown DHCP

server

Master could not find the DHCP server. Fast Blink Off Off

Downloading Boot

firmware

Downloading Boot firmware to the Master

Card's on-board flash memory.

Do not cycle power during this process!

Fast Blink Fast Blink Fast Blink

No program running There is no program loaded, or the pro-

gram is disabled.

On Normal Normal

Normal Master is functioning normally. 1 blink per second Indicates

activity

Indicates

activity

A static IP must be used for both the Master and computer if there is no DHCP server.

FIG. 2 Layouts of the ICSNet and ICSHub LEDs

ICSNet

OUT

ICSHub

ICSHub OUT LED (yellow):

lights to indicate data input

activity on this port.

ICSNet LED (green):

lights to indicate data input

activity on this port.

ICSHub IN LED (yellow):

lights to indicate data

input activity on this port.

1 2 3 4 5 6 7 8 9 ... 48

Comments to this Manuals

No comments

AMX NetLinx Master-Ethernet Card/Module NXC-ME260 Instruction Manual Page 8

Comments to this Manuals

Related products and manuals for Supplementary music equipment AMX NetLinx Master-Ethernet Card/Module NXC-ME260