AMX NetLinx Master-Ethernet Card/Module NXC-ME260 Instruction Manual download pdf (Page 43)

NetLinx Security

NXC-ME260 NetLinx Master-Ethernet Card/Module

Main Security Menu

The Main Security menu is described below:

Main Security Menu

Command Description

1) Set system security options for

NetLinx Master

This selection will bring up the Security Options Menu

that allows you to change the security options for the

NetLinx Master (refer to the Security Options

Menu section on page 31 for details). These are "global"

options that enable rights given to users and groups. For

instance, if you want to disable Telnet security for all

users, you would simply go to this menu and disable Tel-

net security for the entire master. This would allow any

user, whether they have the rights to Telnet or not. These

options can be thought of as options to turn on security

for different features of the NetLinx Master.

2) Display system security options for

NetLinx Master

This selection will display the current security options for

the NetLinx Master.

3) Add user This selection will prompt you for a user name and pass-

word for a user you would like to create. After the user is

added, you will be taken to the Edit User Menu to setup

the new users rights (see the Edit User Menu section on

page 33 for details).

4) Edit user This selection will prompt you select a user. Once you

have selected the user you want to edit, it will take you to

the Edit User Menu so you can edit the user's rights (see

the Edit User Menu section on page 33 for details).

5) Delete user This selection will prompt you select a user to delete.

6) Show the list of authorized users This selection displays a list of users.

7) Add group This selection will prompt you for a group name fro a

group you would like to create. After the group is added,

you will be taken to the Edit Group Menu to setup the new

users right (see the Edit Group Menu section on page 35

for details).

8) Edit group This selection will prompt you select a group. Once you

have selected the group you want to edit, it will take you to

the Edit Group Menu so you can edit the group's rights

(see the Edit Group Menu section on page 35 for details).

9) Delete group This selection will prompt you select a group to delete. A

group can only be deleted if there are no users assigned

to that group.

10) Show list of authorized groups This selection displays a list of groups.

11) Set Telnet Timeout in seconds This selection allows you to set the time a telnet session

waits for a user to login. When a Telnet client connects to

the NetLinx Master, it is prompted for a user name. If the

client does not enter a users name for the length of time

set in this selection, the session will be closed by the

NetLinx Master.

12) Display Telnet Timeout in seconds This selection allows you to display the time a telnet ses-

sion waits for a user to login.

13) Make changes permanent by saving to

flash

When changes are made to the security settings of the

master, they are initially only changed in RAM and are not

automatically saved permanently into flash. This selection

saved the current security settings into flash. Also, if you

attempt to exit the Main Security Menu and the security

settings have changed but not made permanent, you will

be prompted to save the settings at that time.

1 ... 42 43 44 45 46 47 48

Comments to this Manuals

No comments

AMX NetLinx Master-Ethernet Card/Module NXC-ME260 Instruction Manual Page 43

Comments to this Manuals

Related products and manuals for Supplementary music equipment AMX NetLinx Master-Ethernet Card/Module NXC-ME260