AMX AVS-OP-0816-567SD Instruction Manual download pdf (Page 68)

Appendix B – Programmer’s Interface for System Diagnostics

Optima SD Instruction Manual

Appendix B – Programmer’s Interface

for System Diagnostics

System Component Information

The Optima SD displays system information in its splash screen* for diagnostic purposes. The

information indicates the current status and well-being of the system components.

The splash screen can be accessed using a terminal emulation program, such as HyperTerminal

(see page 30). One of four verbosity** settings is specified, which provides either a list of the five

system components with minimal information (FIG. 34) or a level of detailed information on one of the

five components. Only one verbosity setting and one component setting can be entered in a command.

The order in which the verbosity and component settings are entered is interchangeable.

Note: In a multi-enclosure system, the splash screen displays information only for the enclosure that

is connected directly to the PC.

* AMX reserves the right to add to the contents of the splash screen at any time, without notice.

** Verbosity (i.e., wordiness) refers to the amount of information provided; the higher the verbosity

setting, the more information is displayed.

FIG. 34 Example of Optima SD splash screen

Command entered to display minimal

information for all system components

The system’s component identity numbers

are to the left of each component

~scr!

[1:Enclosure] AutoPatch Optima

[2:Storage Blocks] cleared

[3:Communication Interfaces] count = 3

[4:Hardware Boards] detected

[5:VM Configuration] count = 3

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 81 82

No comments

AMX AVS-OP-0816-567SD Instruction Manual Page 68