AMX AVS-OP-0816-567SD Instruction Manual download pdf (Page 51)

APWeb Expansion Board

Optima SD Instruction Manual

The APWeb Board

The APWeb board has a TCP/IP Ethernet link connector, three indicator LEDs, and a Service switch.

TCP/IP Ethernet Link Connector

The APWeb board has a TCP/IP Ethernet (RJ-45) link connector that handles Ethernet 10/100

connections for 10 Mbps (megabits per second) and 100 Mbps. This connection is compatible with most

Ethernet based LANs.

Important: Do not use this connector for linking enclosures.

Indicator LEDs

Above the TCP/IP connector are three green indicator LEDs, which indicate the following:

Ethernet Speed Indicator

 On – speed status is 100 Mbps

 Off – speed status is 10 Mbps

Ethernet Link Indicator

 On – link status is active

Power Indicator

 On – system is receiving power

Note: The two small rectangular LEDs on the RJ-45 connector are not used on this product.

Service Switch

Below the TCP/IP connector is a Service switch that can be used to override system security if the

username and password are lost. The APWeb Instruction Manual includes instructions for restoring the

default username and password.

The switch can also be used to upgrade the APWeb board firmware. Do not attempt to update the

firmware unless directed to do so by technical support.

Caution: For security purposes, firmware upgrades cannot be performed remotely.

FIG. 27 The APWeb board

Service Switch (set for normal function)

Ethernet Link Indicator

Power Indicator

TCP/IP Ethernet Link Connector

Ethernet Speed Indicator

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 81 82

No comments

AMX AVS-OP-0816-567SD Instruction Manual Page 51