AMX TXC16 Plus Specifications download pdf (Page 64)

SG-2000 MANUAL 57

The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA

13.0 Tour of the SG-2000

The heart of the SG-2000 is the front panel. We have made that as uncluttered as

possible while still being able to handle many advanced functions. The front panel of

the SG-2000 is dominated by a large liquid crystal display (LCD) which dominates the

front panel. The large display was selected because in many applications, the operating

conditions of the radio need to be quickly determined. The large backlit display is

easily read under all conditions. The backlight may be turned on and off or adjusted as

conditions indicate. Now, lets explore the display and what the various LCD indicators

mean.

13.1 Front Panel LED Display

REFER TO DRAWING - PAGE 43 (Left to Right - Top half of display)

PRGM Upper left corner of display. This indicates when the radio is

in the Program mode. This mode is used to make permanent

or temporary changes to the memories of the SG-2000. Think

of this button as the "Enter" key.

SCAN Upper left corner of display. This is activated when the radio

is Scanning. Note that the SG-2000 has several ways to scan:

by Channel, by Frequency, and by Band. These functions are

fully explained in the section Advanced Operations, later in

this manual.

CHAN

FREQ

RCV

XMT

Upper left corner of display. These are status indicator lights

which tell you what the SG-2000 is doing at any particular

moment. Most times, you will have two of the four status

indicators on. If you are listening to KMI on Channel 403,

you would have the CHAN indicator on and the RCV

indicator on. This tells you that the number on the display, to

the right of the indicator is showing a channel number, in this

case, 403. It also says that the radio is in the receive mode, as

indicated by the RCV indicator.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 241 242

No comments

AMX TXC16 Plus Specifications Page 64