AMX TXC16 Plus Specifications download pdf (Page 42)

SG-2000 MANUAL 35

The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA

9.8 Remote Head Cable Extension

In the event that you need to extend the length of the control cable on the head of an

SG-2000, two steps need to occur:

First, you have to remove the control head from the radio. The procedure above will

allow you to remove the control head.

Second, you need to replace the existing cable with a longer one.

The cable which connects the SG-2000 to the control head(s) is attached to the units

using standard connectors at each end. In this manner, the length of the control cable

may be easily changed. Carefully unplug the existing cable assembly from the control

head and radio and replace it with the desired length.

While we recommend that you use the control head wiring supplied by SGC, you may

use any other 10-conductor shielded wiring. Remember, however, that the length of the

cable run to a remote head is partly determined by the quality of wiring used. If you

use very small conductors and try to exceed the 50 meter RS-422 standard distance, you

may be disappointed. If, on the other hand, you choose suitably large conductors, (#18

or larger), you will achieve excellent results beyond 50 meters.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 241 242

No comments

AMX TXC16 Plus Specifications Page 42