AMX TXC16 Plus Specifications download pdf (Page 112)

SG-2000 MANUAL 105

The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA

5. Customers may sell unmodified copies of the software pro-

vided that the customer has purchased one copy for each

copy sold.

6. All copyright notices shall be retained on all copies of the

software.

B. SGC, Inc shall be absolved from all liability resulting from the use

of this software. SGC's sole liability will be for free replacement of

damaged software.

C. SGC, Inc. reserves all title to the software which is copyrighted

property of SGC, Inc.

6. RS-232 Software Troubleshooting

A. PROBLEM: When I type "SGC" (and enter) the computer responds

with "Bad Command or File Name".

SOLUTION: Make sure you have logged onto the drive containing

the SG-2000 software.

B. PROBLEM: When I type "SGC" (and enter) the computer flashes a

message "Communications not established, please check con-

nections and try again."

SOLUTION: Check cable connections first. If all is well, then the

next most probable cause is that one of the cables you have tried

using is a null modem cable. If this is the case, either replace the

cable with a standard one or exchange pins 2 and 3 on one end of

the null modem cable.

7. SG-2000 RS-232 Software Technical Support

All current changes to this software may be found in the ASCII file titled

READ.ME which is included on the software disk.

We hope you do not encounter problems operating our SG-2000 software, but in

the event you do, software technical support is available Monday to Friday from

8:00 AM to 5:00 PM Pacific Time at the following:

Voice: (206) 746-6310

Fax: (206 ) 746-6384

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 241 242

No comments

AMX TXC16 Plus Specifications Page 112