Working With Properties
270
TPDesign4 (v3.2 or higher)
Advanced Address Codes (Cont.)
TakeNote With Address Port set to 0 - setup port (in the Programming tab of the Properties win-
dow), several TakeNote options are available (as Advanced address codes).
Use these options to create buttons that allow you to adjust the following options for
TakeNote annotations, directly from the panel.
• Font Size: Sets the size of the font used by the text tool in TakeNote.
• Overall Opacity: This slidebar allows a user to change the overall opacity of the
TakeNote (annotations) canvas from Less Opaque (less transparent/solid) to More
Opaque (More transparent/solid) and several points in between.Opacity only applies
to transparent mode, it does not work in the blackboard and whiteboard mode.
• Pen Width: Sets the width of the lines drawn with the pen tool in TakeNote.
• Shape Side Count: Sets the number of sides to use to draw shapes in TakeNote.
High side counts will result in smoother curves.
Time Set With Address Port set to 0 - setup port (in the Programming tab of the Properties win-
dow), several Time Set options are available (as Advanced address codes):
Use these options to create buttons that allow you to adjust the Master’s calendar date
and time, directly from the panel:
• Day: Use the UP/DN buttons to alter the day value. Range = 1 – 31.
• Hour: Use the UP/DN buttons to alter the hour value. Range = 1 – 24.
• Minute: Use the UP/DN buttons to alter the minute value. Range = 1 – 60.
• Month: Use the UP/DN buttons to alter the month value. Range = 1 – 12.
• Second: Use the UP/DN buttons to alter the second value. Range = 1 – 60.
• Year: Use the UP/DN buttons to alter the year value. Range = 2000 – 2037.
Warning Message These functions are intended for internal use only, no custom settings are required.
Wireless These functions are intended for internal use only, no custom settings are required.
Video With Address Port set to 0 - setup port (in the Programming tab of the Properties win-
dow), several Video options are available (as Advanced address codes).
Use these options to create buttons that allow you to adjust the following values for the
video source, directly from the panel:
• Brightness: Use the UP/DN buttons to alter the brightness level of the incoming
signal. Range = 0 - 255, default = 128.
• Contrast: Use the UP/DN buttons to alter the contrast level of the incoming signal.
Range = 0 - 255, default = 128.
• Hue: Use the UP/DN buttons to alter the hue level of the incoming signal. Range = 0
- 255, default = 128.
• Input: Allows you to cycle through a choice of available video inputs (either
Composite or S-Video). Default = Composite.
• Saturation: Use the UP/DN buttons to alter the color saturation level of the incoming
signal. Range = 0 - 255, default = 128.
• Status: Displays whether or not a video-sync signal is detected.
•
Version: Displays the Firmware version being used by the selected TP4-VID card.
VideoRGB With Address Port set to 0 - setup port (in the Programming tab of the Properties win-
dow), several VideoRGB options are available (as Advanced address codes):
Use these options to create buttons that allow you to adjust the following values for the
RGB video source, directly from the panel.
• Slot 1: Selects the TP4 card connected to slot number 1, and displays the
corresponding setup page.
• Slot 2: Selects the TP4 card connected to slot number 2, and displays the
corresponding setup page.
• Slot 3: Selects the TP4 card connected to slot number 3, and displays the
corresponding setup page.
• Slot 4: Selects the TP4 card connected to slot number 4, and displays the
corresponding setup page.
Video Streaming These functions are intended for internal use only, no custom settings are required.
Comments to this Manuals