AMX MVP-5200i Installation Guide

Browse online or download Installation Guide for TVs & monitors AMX MVP-5200i. AMX MVP-5200i Installation guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation Guide
MVP-5200i
Modero
®
Viewpoint
®
Widescreen Touch Panel
Overview
The MVP-5200i Modero® Viewpoint® Widescreen Touch Panel is AMX’s smallest and
most powerful wireless handheld panel, available in black (FG5966-01) and white
(FG5966-02). The MVP-5200i is a wireless-only ergonomic device capable of Voice
Over Internet Protocol (VoIP) communication, with all control established through a
NetLinx Master. Besides offering the same functionality as the rest of AMX’s line of G4
touch panels, the MVP-5200i touch panel offers full duplex VoIP communication, quick
wakeup and connection time, and an extended battery life for longer operation
between charges. The MVP-5200i device utilizes a 5.2" Color Active LCD to display a
800 x 480 pixel image with 262,144 colors.
The MVP-5200i comes with an integrated rear "kickstand", allowing it to be used and
displayed away from a docking station if necessary. It also comes with a pre-installed
802.11g WPA/WPA2 SDIO wireless card.
For detailed installation, configuration, programming, file transfer, and operating
instructions refer to the MVP-5200i Modero ViewPoint Touch Panel User Manual,
available online at www.amx.com.
Specifications
Table Charging Station Connector Locations
With the unit facing you, the mini-USB port (for programming and downloading
firmware, as well as connecting USB headphones using the AMX-provided adaptor
cable) and the DC power jack are located on the lower left side of the device. The
connector for the Table Charging Station is located on the bottom of the device.
The MVP-5200i is the first G4 device to support a new Ethernet over USB driver for
panel downloads and firmware updates. This means that the device can connect to the
Internet through its mini-USB port instead of through a standard Ethernet port.
In addition to its speaker, the MVP-5200i also utilizes its mini-USB port as a connector
for standard headphones or headsets. These headphones must use a mini-USB plug
or adapter, such as the MVP-HP USB 1/8” Adapter, in order to utilize this feature.
FIG. 1
MVP-5200i-GB touch panel
MVP-5200i Specifications
Dimensions: 4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3
mm)
Weight: Panel: 1.4 lbs (0.64 kg)
Power Requirements
(Without Charging):
Panel with battery fully charged or with no battery:
Constant current draw: 0.3 A @ 12 VDC
Startup current draw: 0.4 A @ 12 VDC
Power Requirements
(While Charging):
Panel while charging battery:
Constant current draw: 1.1 A @ 12 VDC
Startup current draw: 1.3 A @ 12 VDC
Minimum Power Supply
Required:
PS3.0 Power Supply (FG423-30) - both 120 VAC and 240
VAC models are shipped with this power supply.
Power Modes: AWAKE: All necessary modules are powered up and
device remains online with the Netlinx Master.
ASLEEP: Only the backlight will be turned off after the
user selectable time of inactivity has elapsed. Panel
resumes the ON mode in ~ 1 second.
STANDBY: Power to all components other than the
touch screen is turned off after the user selectable time
of inactivity has elapsed. Device will turn back on by
touching the screen.
SHUTDOWN: Power to all peripherals and components
is turned off. The system remains in this mode until it is
rebooted.
Battery Duration: Four days of normal use, in a combination of Awake,
Standby, and Shutdown.
Eight hours of continuous use (continuous On state).
Memory: 128 MB Mobile DDRAM (upgrade not available)
256 MB NAND Flash (upgrade not available)
Navigation
Touch Screen
Microphone
Speaker Grille
Wheel
Navigation Wheel LED
MVP-5200i Specifications (Cont.)
Screen Properties: Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame
frequency
Type: WVGA
Aspect ratio: 16 x 9
Brightness (luminance): 300 cd/m
2
Channel transparency: 8-bit Alpha blending
Contrast ratio: 20:1
Display colors: 262,144 colors (18-bit color depth)
Dot/pixel pitch: 0.23 mm
Panel type: TFT Color Active-Matrix
External Components
Connector: 5-pin Mini-USB connector used for output to USB
headphones, programming, firmware update, and touch
panel file transfer between the PC and the target panel.
Note: When connecting the panel to PC using a CC-USB
(or compatible) cable, be sure to power the panel On
before attempting to connect the USB cable from the PC
to the mini-USB port on the panel.
Internal Components:
IR Emitters: Transmit IR over 20 feet (6.10 m) from the panel.
IR emitters on G4 panels share the device address
number of the panel.
Transmits AMX fixed frequencies at 38KHz and 455KHz
and user programmable frequencies from 20KHz to
1.5MHz
Certifications: FCC Part 15 Class B
•CE
IEC/EN-60950
•RoHS
Japan Approved
Lithium polymer microbattery: UN/IATA
Operating/Storage
Environment
Operating Temperature: 0° C (32° F) to 40° C (104° F)
Operating Humidity: 20% - 85% RH
Storage Temperature: -20° C (-4° F) to 60° C (140° F)
Storage Humidity: 5% - 85% RH
Included Accessories: Installation Guide (93-5966-01)
PS3.0 Power Supply (FG423-30)
MVP-STYLUS-52 (pre-installed onto the right side of the
unit) (FG5966-06XX)
Other AMX Equipment: MVP-TCS-52: Table Charging Station (FG5966-1X)
MVP-WCS-52: Wall Charging Station (FG5966-1X)
MVP-BP-5X: Battery Pack Kit (FG5966-27)
MVP-STYLUS-52: Replacement Stylus, Pack of 3
(FG5966-2X)
CC-USB: USB Programming Cable (FG10-5965)
MVP-HPUSB 1/8” Adapter (FG5966-23)
FIG. 2
MVP-5200i Connector Locations
Front
Mini-USB port
DC power jack
Charging Station
Connector
Page view 0
1 2

Summary of Contents

Page 1 - MVP-5200i

Installation GuideMVP-5200i Modero® Viewpoint® Widescreen Touch PanelOverviewThe MVP-5200i Modero® Viewpoint® Widescreen Touch Panel is AMX’s smallest

Page 2 - Proper Battery Maintenance

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).11/09©2009 AMX. All rights reserved. AMX and the

Comments to this Manuals

No comments